Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Palm Beach, FL
Geometric and shaped windows in Palm Beach typically run between $400 and $1,800 per unit installed, depending on the shape, size, impact rating, and glass package. Most homeowners in Palm Beach have them fabricated and installed within two to three weeks from the initial measurement visit. At Winslow Windows & Doors, we handle the full process – custom templating, impact-rated glass sourcing, and final installation – so the finished window fits the opening exactly and holds up to South Florida’s weather without compromise.
If you have an arched & curved window transom above a front door, an octagonal accent window on a second-floor gable, or a round porthole window that’s fogged out and leaking, this is the page for you. These openings are not one-size-fits-all, and they need an installer who does the measuring themselves rather than handing a spec sheet to a warehouse and hoping for the best. Ed Winslow has been doing exactly that in Palm Beach since 2011, and his name is on the door of every job we complete.
Call us at (561) 831-7863 any time – a live person answers around the clock. Or read on to learn what shaped window work actually involves, what it costs in this market, and why the details matter more here than almost anywhere else in Florida. You can also visit our Custom & Geometric Windows in Palm Beach parent page for the broader picture of everything we do in this category.
When You Need Geometric & Shaped Windows
Palm Beach homes are not shy about architectural character. From Spanish Colonial revival cottages near Everglades Island to the Mediterranean estates along South Ocean Boulevard, non-rectangular windows are common – and they come with specific problems that a standard replacement crew simply is not set up to handle. Here are the situations we see most often:
- Fogging or seal failure in an arched or eyebrow window. The thermal seal between panes eventually fails in Florida’s humidity, and shaped glass is harder to replace than a stock rectangle. If you’re looking at permanent condensation inside the glass on a transom or half-round, the unit needs to be replaced – cleaning it from the outside does nothing.
- Storm damage to a decorative gable window. After a significant storm season, we frequently find cracked or shattered glass in octagonal and triangular gable windows throughout Palm Beach. Because these are custom shapes, a big-box store cannot hand you a replacement off the shelf.
- An existing shaped window that was never impact-rated. Many older Palm Beach homes have beautiful arched windows that predate Florida’s post-Andrew building codes. They look fine but offer no meaningful protection. Upgrading to impact-rated glass in the same shape keeps the architectural character and satisfies current code.
- A new addition or renovation that needs a custom opening filled. Architects and builders working on Palm Beach properties regularly spec non-standard window shapes to match existing profiles. We work directly from architectural drawings to produce units that fit the first time.
- Water intrusion around a shaped frame. The irregular perimeter of a circle or polygon window creates more opportunities for sealant failure than a straight-sided frame. If you’re seeing staining on interior drywall near a shaped window, the frame and flashing almost certainly need attention before the glass itself.
- An outdated or mismatched shape after a partial renovation. We’ve been called to properties on North Lake Way and El Bravo Way where a previous remodel updated the rectangular windows but left the original shaped accents untouched. The mismatch is obvious from the street, and the old units are often single-pane and inefficient.
Our Geometric & Shaped Windows Process
Shaped window work has no margin for close enough. A standard window that is a quarter-inch off can be shimmed and caulked into place; a circle or arch that is off by a quarter-inch leaves a gap that no amount of sealant fixes correctly. Here is how we handle it, start to finish:
- On-site templating and measurement. We come to your property and take physical measurements of the opening – not just width and height but the true geometry of curves, angles, and any asymmetry in the existing rough opening. For arched windows, we measure the rise and chord separately. For polygons, we document every angle. We do not rely on homeowner-supplied measurements for shaped work.
- Product and glass selection. Once we have the geometry, we walk you through the glass and frame options that fit your opening and Palm Beach’s local code requirements. For impact-rated units, we work with brands like PGT and CGI, both of which manufacture custom shaped impact windows to meet Florida Product Approval standards. We’ll discuss solar heat gain coefficients that matter in Palm Beach’s exposure, Low-E coatings, and frame finishes that match your existing exterior.
- Upfront pricing before we order anything. You receive a written quote with line items – fabrication cost, installation labor, any trim or stucco repair, and permit fees if applicable – before a single unit goes into production. No surprises on the invoice is not a slogan here; it’s the way Ed runs the business.
- Permitting, where required. Palm Beach County requires permits for window replacements that change the opening size or involve new structural work. We pull the permits, schedule the inspections, and handle the paperwork. You do not need to visit the building department or track an inspection date.
- Precision installation. Our background-checked, uniformed technicians remove the old unit, inspect the rough opening and surrounding structure for rot or water damage, flash the opening correctly, and set the new window. For arched or circular units, this step is slower than a rectangle install – the frame has to be set in sections in some cases, and the sealant has to be applied in a specific sequence. We do not rush it.
- Final walkthrough and cleanup. Before we leave, we walk the installation with you, demonstrate any operable hardware, and confirm the window meets your expectations. Every job is backed by the 36500-Day Done Right Promise – if it’s not right, we come back and make it right. That promise does not have an expiration clause buried in the fine print.
Geometric & Shaped Windows Pricing in Palm Beach
Shaped window pricing in Palm Beach is more variable than standard replacement windows because every unit is effectively custom-made. The table below reflects what we see in this market – it is not a national average pulled from a spreadsheet.
| Window Shape / Type | Typical Installed Price Range |
|---|---|
| Half-round or quarter-round transom (non-impact) | $400 – $650 |
| Half-round or quarter-round transom (impact-rated) | $650 – $1,050 |
| Oval or full-circle window, small (up to 24″ diameter) | $550 – $900 |
| Oval or full-circle window, large (24″+ diameter) | $800 – $1,400 |
| Octagonal or hexagonal accent window (impact-rated) | $700 – $1,200 |
| Triangle or trapezoid gable window (impact-rated) | $750 – $1,350 |
| Eyebrow or custom arch, large (over 48″ chord) | $1,100 – $1,800+ |
What Moves the Price Up or Down
- Impact rating: Impact-rated glass costs more than standard glass, but it is the only option that meets current Palm Beach County code for openings that require protection. In many Palm Beach properties, there is no legal way to install non-impact glass in an exposed opening without a shutter system on every unit.
- Glass package: Low-E coatings, laminate thickness, and solar control glass all affect fabrication cost. In Palm Beach’s sun exposure, a higher-performance glass package often pays back in reduced cooling costs within a few years.
- Frame material and finish: Vinyl frames cost less than aluminum or fiberglass. Custom color matches or anodized finishes cost more than standard white or bronze.
- Stucco or trim repair: Older Palm Beach homes often have stucco surrounds that crack when an old frame is removed. If repair is needed, we price it upfront – it is not an add-on you discover after the fact.
- Permit fees: Palm Beach County building permit fees vary by project value. We include an accurate estimate in your written quote.
Seniors and veterans receive a permanent 10% discount on all services – no expiration, no conditions. If you have a written estimate from another contractor, we offer a free second opinion – no charge, no pressure, just an honest comparison. Call (561) 831-7863 for a free on-site estimate; our estimator will come to your property and quote the job in writing before you commit to anything.
Why Palm Beach Shaped Windows Need Special Attention
Palm Beach is not a typical Florida market in several ways that affect window work directly. The town’s architectural review board has jurisdiction over exterior changes on many properties, particularly in historically designated districts. Before we replace a shaped window on a property subject to ARCOM review, we confirm whether the replacement profile needs to match the original exactly – and we work with frames and glass that can be ordered in custom profiles to satisfy that requirement.
The climate adds its own pressure. Salt air from the Atlantic accelerates frame corrosion on aluminum units that are not properly coated, and UV exposure in Palm Beach is intense enough that inferior glazing compounds degrade visibly within a few years. We specify materials that hold up here, not materials that look good in a brochure photographed somewhere in the Midwest.
We also see a specific pattern in the neighborhoods along the north end of Palm Beach – properties on North Lake Trail and around the Lake Worth Lagoon side often have prevailing west wind exposure that their owners underestimate. A custom impact window that faces the water needs the same impact rating as a window facing the ocean, but it is easy to overlook when only the ocean side feels obviously exposed. Ed flags this on every estimate because it is the kind of detail that matters after a storm, not before one.
For homeowners researching the full scope of our custom window work, the Winslow Windows & Doors home page covers everything we install and repair across Palm Beach County.
FAQs – Geometric & Shaped Windows in Palm Beach
Can a shaped window be made impact-rated in Palm Beach?
Yes – impact-rated glass can be fabricated in virtually any oversized opening or custom shape, including full circles, arches, octagons, and triangles. Both PGT and CGI produce impact-rated shaped units with Florida Product Approval, which is what Palm Beach County requires for permitted work. The frame profile and glass package are engineered to meet the same wind-load standards as a rectangular impact window. If you have a shaped window in an exposed opening on a Palm Beach property, replacing it with an impact unit is almost always the correct choice – call (561) 831-7863 and we’ll walk you through the options specific to your opening.
How long does a custom shaped window take to arrive after I order it?
Fabrication typically takes two to four weeks from the date we submit the order, depending on the manufacturer’s current lead time and the complexity of the shape. Once the unit arrives, installation is usually scheduled within a few business days. From the time we take measurements to the time the new window is in your wall, most Palm Beach homeowners are looking at three to five weeks total. We give you a realistic timeline in writing at the estimate stage – not a number designed to get you to sign and then push out later.
Do I need a permit to replace a shaped window in Palm Beach?
It depends on the scope of work. In Palm Beach County, replacing a window with a unit of the same size in the same opening generally requires a permit when the replacement window is impact-rated or when any structural modification is involved. Non-structural like-for-like replacements in some jurisdictions can qualify for a simplified permit or no permit at all, but we verify the specific requirement for your address before we start. We pull all permits and handle inspections as part of the job – you do not need to manage that process yourself. Call (561) 831-7863 if you’re not sure where your property stands.
What happens if the new shaped window doesn’t fit correctly after installation?
That situation is covered by our 36500-Day Done Right Promise – if the installation is not right, we come back and make it right at no cost to you. This is also why we do our own on-site templating rather than relying on homeowner measurements: the fit is our responsibility from the first measurement to the final seal. In the rare case where a manufacturing defect causes a fit issue, we work directly with the manufacturer to get a corrected unit and reinstall it. You do not get handed a warranty card and told to call a 1-800 number.
Key Takeaways
- Geometric and shaped windows in Palm Beach are always custom-fabricated – there is no off-the-shelf replacement for an arch, circle, or polygon window.
- Installed prices in Palm Beach typically range from $400 to $1,800+ per unit, depending on shape, size, impact rating, and glass package.
- Impact-rated shaped windows are available from authorized manufacturers like PGT and CGI and meet Florida Product Approval standards for Palm Beach County.
- Permitting, on-site templating, and final inspection are all handled by Winslow Windows & Doors – not delegated to the homeowner.
- Every installation is backed by the 36500-Day Done Right Promise – no expiration, no fine print.
- Seniors and veterans receive a permanent 10% discount; free second opinions are available on any written estimate.
- A live person answers at (561) 831-7863 any hour of the day or night.
Get a Free Estimate on Shaped Windows in Palm Beach
If you have an arched transom, a fogged porthole, an octagonal gable window that took storm damage, or any other non-rectangular opening that needs attention, call Winslow Windows & Doors at (561) 831-7863. We’ll schedule an on-site visit, take our own measurements, and give you a written quote with line-item pricing before anything is ordered. No trip charge for properties inside our home county, no pressure to decide on the spot, and no voicemail – a real person picks up, any time you call.
Ed Winslow has been doing this work in Palm Beach since 2011. His name is on the business, his license number is public record, and his word is behind every job. That is not a marketing line – it is the way the company has operated from day one, and it is the standard we hold ourselves to on every shaped window we install.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.