Custom & Geometric Windows in Palm Beach - Free In-Home Measure, Written Price

Trusted Custom & Geometric Windows for Palm Beach Homeowners

Custom and geometric windows in Palm Beach typically cost $1,800 to $6,500 per window installed, depending on size, glass package, and whether impact rating is required. Most installations take three to six weeks from final measurement to completion, and Winslow Windows & Doors handles every step from template to final inspection. If you’re looking at an arched transom, a half-round accent window, or a full wall of trapezoid glass, call (561) 831-7863 and Ed Winslow will walk you through what’s actually involved, what it costs, and whether the opening needs structural work before glass goes in.

Call (561) 831-7863

Ed Winslow has been installing custom and geometric windows in Palm Beach since 2011, and his name is on the door, and on every job we do. We’re the locally owned alternative to national chains that treat a radius window like a commodity order. When homeowners call us about a custom window, they get a live person on the phone, not a ticket number. When our tech arrives, he’s background-checked, uniformed, and he knows the difference between a true arch and an eyebrow. That matters more than most people realize until they’ve lived with a window that was ordered wrong.

Key Takeaways

• Custom and geometric windows in Palm Beach run $1,800 to $6,500 per window, with impact-rated glass on the higher end.
• Winslow Windows & Doors is locally owned by Ed Winslow and has served Palm Beach since 2011.
• We’re authorized installers for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux.
• Every project is backed by the 36500-Day Done Right Promise: if it’s not done right, we make it right.
• Free estimates, no trip charge inside our home county, and a live person answers every call, 24/7.

What Our Custom & Geometric Windows Service Includes

Custom windows aren’t stock units pulled off a warehouse shelf. They’re measured, templated, fabricated, and installed for one specific opening in one specific home. That’s the entire point. In Palm Beach, where homes range from 1920s Mediterranean Revival to new coastal contemporary, cookie-cutter windows simply don’t fit a lot of openings. Our service covers four distinct categories, each with its own engineering considerations.

Custom Impact Windows

Custom Impact Windows combine a non-standard shape or size with Miami-Dade or Florida Building Code impact approval. In Palm Beach, homes east of the Intracoastal are in the High Velocity Hurricane Zone, which means impact glazing isn’t optional for new construction and most major remodels. We install impact-rated custom windows from PGT and CGI that carry design pressure ratings appropriate for coastal exposure. Every custom impact window we install is permitted, inspected, and backed by the manufacturer’s warranty plus our own 36500-Day Done Right Promise.

Geometric & Shaped Windows

Geometric & Shaped Windows include trapezoids, parallelograms, triangles, pentagons, and other non-rectangular shapes that add architectural interest or fill angled rooflines. These windows often appear in great rooms, stair landings, and gable ends where standard rectangles can’t follow the roof pitch. We measure every angle digitally, template the opening, and order from manufacturers like CWS and ECO Window Systems that specialize in true geometric fabrication. The result is a window that fits the first time, without shim stacks or oversized trim concealing measurement errors.

Arched & Curved Windows

Arched & Curved Windows include full half-rounds, quarter-rounds, elliptical arches, and eyebrow windows with a gentle radius. These are the windows most likely to be ordered incorrectly by installers who measure only width and height without capturing the actual radius. We template every curved opening using a physical pattern that goes to the manufacturer. Whether you’re replacing a rotted wood arch on a 1930s Palm Beach cottage or adding a modern radius window to a new build, the template eliminates the guesswork that turns curved windows into a six-month nightmare.

Oversized Openings

Oversized Openings and custom windows fill openings that exceed standard maximum dimensions, often replacing sliding glass doors or creating a fixed glass wall. These windows require structural review before installation: the header has to carry the load, the glass package has to meet wind load requirements, and mulling multiple units together demands engineering that most window companies don’t do. We work with structural engineers when needed, pull permits on every job, and install oversized glass with the lifting equipment and crew size the job actually requires. If we wouldn’t put it on our own home, we won’t put it on yours.

Brands We Service for Custom & Geometric Windows

We’re authorized installers for PGT Custom Windows & Doors, and we’ve installed their custom and impact-rated geometric units in homes from Palm Beach Shores up to Juno Beach. PGT’s Custom division is our go-to for impact-rated shaped windows because their engineering team can calculate design pressure ratings for non-rectangular glass, which many manufacturers won’t even attempt. We’ve ordered PGT trapezoids, radius units, and oversized fixed glass for coastal homes where structural integrity and hurricane protection can’t be compromised.

CGI and CWS round out the custom impact lineup. CGI builds heavy-duty aluminum and vinyl impact windows that handle the salt air and wind loads along Palm Beach’s oceanfront. CWS is newer to the Florida market but their geometric fabrication and glass options give homeowners more flexibility on shapes and sightlines without sacrificing impact performance. We also work with ViewLux on select custom projects, particularly when a homeowner wants slim frames and maximum glass area. Whatever brand is on your existing windows or in your architect’s spec, we can service it, and if you’re not sure which brand fits your project, call (561) 831-7863 and we’ll give you a straight answer.

Signs You Need Custom & Geometric Windows Right Now

Some window problems are obvious. Others creep up over years until the damage is done. Here’s what we see most often in Palm Beach homes, and why these signs matter.

• Visible daylight around the frame or sash. If you can see light through gaps around a window that’s supposed to be closed, the seal or the frame has failed. That gap is letting conditioned air out and humid salt air in, and in a shaped or radius window, the fix usually requires a full replacement, not a caulk bead.
• Hard water staining or fogging between glass panes. Failed seals on dual-pane glass show up as persistent fog or mineral haze you can’t wipe away. In geometric windows, seal failure often happens earlier because the stress on the glass edge is uneven, and once the seal is gone, the insulating gas is gone too.
• Condensation or water damage on interior drywall or trim. Water finding its way around an arched or oversized window often shows up first as peeling paint or soft drywall below the sill. By the time you see it, the flashing or the frame has been leaking for months. We find this regularly in older Palm Beach homes where the original windows were never flashed correctly.
• Difficulty opening, closing, or locking the window. Warped frames, failed balances, or swelling from moisture make shaped windows bind. A window that won’t lock is also a security issue, especially on ground-level or accessible openings. When a geometric window binds, the frame has usually shifted or the glass unit has slipped, and forcing it makes the problem worse.
• Rattling, drafts, or outside noise that’s getting worse. Loose glass, worn weatherstripping, and failed structural connections all announce themselves as movement and air infiltration. In Palm Beach, where wind and sound travel differently oceanfront versus inland, a window that rattles in a storm is one that needs attention before the next hurricane season.

If any of these sound familiar, call (561) 831-7863. We’ll send a technician to assess the opening, and the estimate is free. No obligation, no pressure, just a straight answer about what needs to happen next.

Our Custom & Geometric Windows Process - Step by Step

Custom window work fails when steps get skipped. We don’t skip steps. Here’s exactly how a project moves from your first call to the final walk-through, and what you can expect at each stage.

1. 1
   Initial consultation and site visit. We come to your Palm Beach home, look at the opening, take rough measurements, and discuss glass options, frame materials, energy performance, and impact requirements. This is where we tell you what’s actually possible, not just what’s orderable. You get a written, line-item estimate before we leave, and a second opinion on any competing written estimate is free.
2. 2
   Precision templating and engineering review. For any non-rectangular opening, we create a physical template and sent it to the manufacturer with the order. We also verify the header and surrounding framing can carry the new window load. If structural work is required, we bring in a licensed engineer and include that in the permit drawings. No permission, no surprises.
3. 3
   Permitting and material procurement. We pull permits through the Town of Palm Beach or the appropriate municipality, and we order the custom window from one of our authorized manufacturers. Lead times vary by brand and glass package, but we give you a realistic delivery window up front, and we update you if the manufacturer’s schedule shifts. Nobody in this industry controls factory lead times, but we control how well we communicate them.
4. 4
   Professional installation and site protection. Our background-checked, uniformed crew arrives with the right equipment for the job. We protect your floors and furnishings, remove and dispose of the old window, and install the new unit per manufacturer’s specifications and Florida Building Code. Flashing, sealants, and insulation are done to coastal standards, because a window that leaks in Palm Beach is a window that fails.
5. 5
   Final inspection and the Done Right walk-through. Once installation is complete, we walk the project with you, verify operation, check the seal, and confirm the permit final inspection with the building department. Every job carries the 36500-Day Done Right Promise: if something isn’t right, we come back and make it right. That’s not a warranty clause. That’s Ed’s word.

How Much Does Custom & Geometric Windows Cost in Palm Beach?

Custom & Geometric Windows Near Palm Beach - Our Service Area

Winslow Windows & Doors serves Palm Beach and the surrounding communities, including West Palm Beach, Palm Beach Gardens, Lake Worth Beach, Riviera Beach, North Palm Beach, Palm Beach Shores, South Palm Beach, Lantana, Mangonia Park, Juno Beach, and Wellington. From our home base, we reach most Palm Beach County addresses quickly, and because our phone is answered by a live person around the clock, you won’t wait on a callback to schedule an estimate. We know these neighborhoods, their building departments, and their architectural quirks, from the historic districts to the new coastal builds.

Frequently Asked Questions - Custom & Geometric Windows in Palm Beach

Schedule Your Custom & Geometric Windows Service in Palm Beach Today

If your Palm Beach home needs a custom or geometric window, don’t settle for a contractor who guesses at the radius and hopes for the best. Ed Winslow has been doing this since 2011, and every job carries his name and the 36500-Day Done Right Promise. Call (561) 831-7863 today for a free, no-obligation estimate. A live person answers, 24/7. The one down the road.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach since 2011.