Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterOversized Openings in Palm Beach, FL
Oversized window openings in Palm Beach typically run from floor-level sills to nine- or ten-foot ceilings, and installing them correctly-whether for Arched & Curved Windows or standard spans-means managing structural loads, impact ratings, and Palm Beach County’s specific permitting requirements all at once. At Winslow Windows & Doors, we’ve been doing exactly that since 2011 – measuring, engineering, and installing oversized openings for Palm Beach homeowners who want the full Atlantic view without cutting corners on code. If you’re starting a project or replacing a unit that wasn’t done right the first time, call us at (561) 831-7863 – a live person picks up every time, around the clock.
Oversized openings fall under the broader discipline of Custom & Geometric Windows in Palm Beach, but they carry their own set of engineering and permitting considerations that standard replacement windows simply don’t involve. The framing, headers, impact glazing size, and wind-load calculations all scale up together – and in Palm Beach, where hurricane exposure categories and historic district guidelines both apply depending on your block, getting those details right from day one matters a great deal.
When You Need Oversized Openings
- You’re replacing a wall of aging jalousies or single-pane sliders with modern impact glass. Older Palm Beach homes – particularly those built in the 1960s and 1970s along South Ocean Boulevard and the El Cid corridor – frequently have openings that were sized for jalousie panels. Converting those to a single, impact-rated oversized unit changes both the look and the protection level dramatically.
- Your architect or designer spec’d a floor-to-ceiling opening for a renovation. New construction and gut-renovations in Palm Beach’s historic neighborhoods often call for openings that exceed 80 inches in height or 72 inches in width – dimensions that require engineered headers and permit review beyond a standard replacement application.
- Your existing oversized unit is leaking, fogging, or failing at the frame seals. Salt air accelerates frame corrosion on oversized openings faster than on smaller units because the glass-to-frame ratio is higher. If you’re seeing water infiltration after a moderate rain or persistent fogging between panes, the unit likely needs full replacement rather than a seal repair.
- You want to capture an unobstructed water or garden view. Many Palm Beach properties along the Intracoastal or on the island’s interior lots have view corridors that a standard window grid breaks up. An oversized, low-profile-frame opening eliminates that interruption without sacrificing the impact rating Palm Beach County requires.
- Your current opening failed a post-storm inspection or insurance re-rating. After a significant weather event, some insurers require documented impact compliance for any opening above a certain square footage. If yours flagged an oversized opening as non-compliant, replacement with a PGT or CGI impact-rated unit often resolves the issue and can affect your premium going forward.
- You’re adding living space – a sunroom, a loggia enclosure, or a second-story addition. New additions in Palm Beach require all openings to meet current Florida Building Code impact standards. Oversized openings in an addition can’t be grandfathered; they need to be sized and specified from scratch.
Our Oversized Openings Process
- Structural assessment and field measurement. Before we talk product, Ed or one of our background-checked technicians walks the opening with you. We’re looking at header depth, existing framing condition, rough opening dimensions to the nearest eighth of an inch, and what’s on the other side of that wall. In Palm Beach, we regularly find that older CBS (concrete block structure) homes have undersized lintels above large openings – something that has to be addressed before any new unit goes in. This visit is free inside Palm Beach County; no trip charge.
- Product selection and engineering review. We match the opening to the right unit from our authorized lineup. For oversized openings in Palm Beach, PGT’s WinGuard and CGI’s SENTINEL lines are the two we reach for most often – both carry Miami-Dade NOA approval and are rated for the 170 mph design pressures Palm Beach County’s coastal exposure zone requires. We pull the wind-load calculations and confirm the unit’s design pressure rating covers your specific site conditions before anything is ordered.
- Permitting with Palm Beach County and the Town of Palm Beach. Oversized openings almost always require a building permit, and in the Town of Palm Beach, projects visible from the street may also require Architectural Review approval. We handle the permit application, the product approval documentation, and the coordination with the inspector’s office – you don’t have to chase paperwork. This is standard, not an add-on.
- Structural preparation and opening modification. If the rough opening needs to be widened, raised, or reinforced, our crew handles that work before the unit arrives on-site. In Palm Beach’s older Mediterranean Revival and CBS homes, this sometimes means installing a new steel lintel or sistering existing framing – work that has to be done and inspected before the window goes in.
- Installation and sealing. Oversized units require multiple technicians and, on some second-story applications, lift equipment. We use manufacturer-specified buck systems and sealants rated for South Florida’s humidity and UV exposure. Every fastener pattern follows the approved shop drawings, and we don’t move to the next step until the rough-in inspection is signed off.
- Final inspection and walkthrough. After the county inspector closes the permit, we do our own walkthrough with you – checking operation, seal integrity, and hardware function. The 36500-Day Done Right Promise covers this work from that day forward: if something isn’t right, we come back. No runaround, no expiration date.
Oversized Openings Pricing in Palm Beach
Oversized window openings in Palm Beach cost more than standard replacements, and the gap is real – so here’s an honest breakdown of what drives the number.
| Opening Type | Typical Installed Price Range (Palm Beach Market) |
|---|---|
| Single oversized fixed impact picture window (up to 60″ x 96″) | $2,800 – $5,500 |
| Oversized impact sliding glass door / window-wall (up to 96″ x 96″) | $4,500 – $9,000 |
| Multi-panel oversized opening with structural modification | $8,000 – $18,000+ |
| Permitting and inspection (Palm Beach County / Town of Palm Beach) | $350 – $900 depending on scope |
| Structural header or lintel upgrade (when needed) | $600 – $2,200 |
A few things move the number up or down in the Palm Beach market specifically:
- Glass package. Low-E coatings, laminated interlayers, and tempered options all affect price. In Palm Beach, most homeowners choose a high-performance low-E laminated unit because it manages both solar heat gain and the impact requirement in a single pane – it costs more upfront but eliminates the need for interior treatments and reduces cooling load noticeably.
- Frame material and finish. Aluminum frames dominate oversized openings in South Florida because of their structural stiffness-to-weight ratio. Powder-coat color choices – including custom RAL finishes for historic district compliance – add to the lead time and cost.
- Structural conditions found on-site. We give upfront pricing, but structural surprises uncovered during demo (deteriorated concrete, corroded lintels) are quoted separately before any additional work begins. You’ll always know the number before we proceed.
- Access and floor height. Second-story openings in Palm Beach estates that require a boom lift or extended scaffolding carry an equipment charge. We tell you that before the contract is signed, not after.
We offer a free, no-obligation estimate on oversized opening projects in Palm Beach and the surrounding area. If you have a written estimate from another contractor, we’ll give you a free second opinion on it – no pressure, no sales pitch. Seniors and veterans receive a permanent 10% discount on all work. Call (561) 831-7863 to schedule your site visit.
FAQs – Oversized Openings in Palm Beach
Do oversized window openings require a permit in Palm Beach, FL?
Yes, virtually every oversized opening in Palm Beach requires a building permit, and projects on the Town of Palm Beach island may also need Architectural Review Board approval if the opening is visible from the street. Palm Beach County requires product approval documentation – typically a Miami-Dade NOA or Florida Product Approval number – for any impact-rated unit in a coastal exposure zone. Winslow Windows & Doors handles the full permit application and inspection coordination as part of every oversized opening project, so you’re not navigating that process on your own. Call (561) 831-7863 and we’ll walk you through exactly what your address requires.
How much does an oversized impact window cost in Palm Beach?
An oversized impact picture window installed in Palm Beach typically runs between $2,800 and $5,500 for a single fixed unit, while multi-panel openings with structural modifications can reach $18,000 or more depending on size and site conditions. The widest cost variation comes from glass package selection, structural preparation work, and the specific permit category your project falls under. Upfront pricing is how we operate – the number you see before signing is the number on the invoice. Call (561) 831-7863 for a free estimate specific to your opening.
Can an oversized opening be widened or raised in an existing Palm Beach home?
Yes, and we do it regularly – particularly in older CBS homes in Palm Beach where original openings were sized for jalousie or louvered panels. Widening or raising an opening means installing a new or larger header, potentially modifying the lintel in a block-wall structure, and ensuring the new rough opening dimensions are permitted and inspected before the window unit is set. In some historic Palm Beach properties, the exterior profile of the modification also needs to stay consistent with the original architecture, which is something we account for during the design phase, including when planning Geometric & Shaped Windows. It’s real structural work, done properly, not just a trim job.
How long does an oversized opening installation take in Palm Beach?
From signed contract to final inspection, most oversized opening projects in Palm Beach take four to eight weeks. Product lead times for PGT and CGI impact units in larger sizes run two to five weeks depending on the glass package and frame finish; permitting in Palm Beach County currently adds one to three weeks to that timeline. The actual installation – once the permit is in hand and the unit is on-site – typically takes one to two days for a single oversized opening, longer for multi-panel configurations or projects requiring structural modification. We give you a realistic schedule at the start, not an optimistic one that gets revised three times.
Why Palm Beach Homeowners Call Winslow
Ed Winslow’s name is on the door – and on every permit we pull, every product we install, and every promise we make. That’s not a marketing line; it’s how the business is structured. When you call (561) 831-7863 at any hour, a live person answers. When a technician shows up at your Palm Beach home, they’re background-checked, uniformed, and accountable to the same standard Ed holds himself to.
We’ve been working in Palm Beach since 2011 – long enough to know that the salt air off the Atlantic accelerates frame degradation faster on oversized openings than on smaller ones, that the Town of Palm Beach’s Architectural Review Board has specific expectations about what replacement openings look like from the street, and that a permit pulled incorrectly on a historic district property can create problems that take months to untangle. That kind of local knowledge doesn’t come from a call center; it comes from 15 years of showing up on this island.
The 36500-Day Done Right Promise backs every job we do. If an oversized opening we installed isn’t performing the way it should – frame, glass, seal, operation – we come back and make it right. No time limit, no fine print, no passing the call to a warranty department that doesn’t answer.
We’re authorized installers for PGT and CGI, the two brands Palm Beach homeowners ask for most often on large-format impact openings and Custom Impact Windows. Both carry the Miami-Dade NOA documentation Palm Beach County inspectors require, and both perform in the 170 mph wind-load environment the coastal exposure category demands here.
If you’ve been quoted on an oversized opening project and want a second opinion on the scope, the product, or the price, that second opinion is free. No obligation. Just an honest read from someone who knows this market.
Get a Free Estimate on Your Palm Beach Oversized Opening
Ready to talk specifics? Call (561) 831-7863 – day or night, someone at Winslow Windows & Doors will pick up. We’ll schedule a free on-site assessment for our Custom & Geometric Windows services, take the measurements, and give you a clear, upfront price before any work begins. No trip charge inside Palm Beach County, and seniors and veterans always receive 10% off. Ed’s word is the warranty, and that’s worth something in Palm Beach.
You can also learn more about the full range of specialty window options we handle by visiting our home page, or explore everything that falls under Custom & Geometric Windows in Palm Beach to see how oversized openings fit into the broader picture.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.