Replacement Doors in Palm Beach, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Replacement Doors in Palm Beach, FL

Replacing a door in Palm Beach is not the same job it is anywhere else in Florida. Between the salt air off the Intracoastal, the hurricane exposure, and the Palm Beach County building code requirements for impact-rated products, a door swap here demands more than a standard pre-hung unit from a big-box store. At Winslow Windows & Doors, we handle our Door Installation services for residential replacement doors from the first measurement to the final hardware adjustment – impact-rated, energy-certified, and done right the first time or we come back. Call us at (561) 831-7863 any time; a live person answers around the clock.

Ed Winslow founded this company in 2011 specifically to give Palm Beach homeowners a locally accountable option – someone with a real address, a published license number, and a name on the door that means something. Our Door Installation in Palm Beach service covers every category, and replacement doors are where we do a lot of our best work: pulling an aging, wind-compromised entry door and setting a new Therma-Tru or PGT unit that meets current Miami-Dade NOA standards and actually fits the opening cleanly.

Upfront pricing. No surprises on the invoice. And the 36500-Day Done Right Promise – if it’s not done right, we make it right, period.

When You Need Replacement Doors

Some signs are obvious. Others creep up slowly until a homeowner in El Cid or the Estate Section realizes their Entry Doors haven’t sealed properly in two hurricane seasons. Here are the situations we respond to most often across Palm Beach:

• Visible storm damage or impact failure. A door that took a hit during a named storm – cracked frame, buckled panel, compromised glazing – needs replacement, not patch work. Temporary repairs do not satisfy Palm Beach County building inspectors and will not restore the impact rating your insurance carrier expects.
• Persistent air and water infiltration. If daylight shows around your door frame or you notice water tracking under the threshold after a hard rain, the door’s seal system has failed. In the high-humidity, salt-air environment along South Ocean Boulevard, that deterioration accelerates faster than it would inland.
• Rotted or warped door frame. Wood frames on older homes in the North End and Midtown neighborhoods absorb moisture over decades. Once rot reaches the structural members, caulk and paint are not a solution – the unit needs to come out and a new one go in.
• Non-compliant door on a permitted renovation. Palm Beach County requires impact-rated doors in all new and replacement installations in wind-borne debris zones. If you’re pulling permits for a kitchen remodel or addition and the inspector flags your existing entry door as non-compliant, we handle the upgrade.
• Major hardware or lock failure. A door that will not latch securely is a real problem. When the frame is sound but the lock set and hinges are beyond service – or when a security upgrade requires a heavier-duty door slab – replacement is often more cost-effective than retrofitting a worn unit.
• Energy efficiency decline. Older doors without low-E glass or proper weatherstripping work against your air conditioner in Palm Beach’s nine-month cooling season. Replacing a single-pane or uninsulated door with a current PGT or Therma-Tru model typically makes a measurable difference on utility bills.

Our Replacement Doors Process

We’ve refined this process over fifteen-plus years of installations across Palm Beach. No step gets skipped, and we don’t hand you off to a subcontractor at the critical parts.

1. Free on-site assessment and measurement. Ed’s team comes to your home – no trip charge inside Palm Beach County – and takes precise measurements of the rough opening. We check the sill condition, note any frame rot or structural concerns, and document the existing door’s specifications so nothing gets ordered wrong. We also confirm whether the project requires a building permit, which most full replacement jobs in Palm Beach do.
2. Product selection and upfront quote. Based on your opening, your home’s design, and your budget, we walk you through the right door options – brand, style, glass package, and impact rating. We carry Therma-Tru, PGT, and CGI products, among others, and we’ll tell you plainly which unit makes sense for your specific situation rather than defaulting to whatever has the best margin. The quote you receive covers product, labor, permit fees if applicable, and hardware. That’s the number on your invoice.
3. Permit and product ordering. Where Palm Beach County building permits are required, we handle the application. Products are ordered through our authorized dealer accounts, which means factory-direct lead times and no gray-market units. Most standard replacement doors arrive in two to four weeks; some PGT and CGI products are faster depending on current production schedules.
4. Professional removal and frame preparation. On installation day, our background-checked, uniformed crew removes the existing door and frame cleanly. We inspect the rough opening for rot, pest damage, or moisture intrusion before anything new goes in. If we find a problem at this stage, we tell you before proceeding – not after.
5. Installation, shimming, and sealing. The new door unit is set, shimmed plumb and level, and fastened to the structural framing according to the manufacturer’s installation instructions and the product’s Notice of Acceptance (NOA). We apply flashing tape and sealant at all critical junctions – this is where a lot of contractors cut corners, and it’s where water finds its way in three years down the road.
6. Inspection sign-off and final walkthrough. We request the county inspection if a permit was pulled, and we walk you through the finished door before we leave: operation, lock function, threshold adjustment, and any care instructions for the finish. The 36500-Day Done Right Promise is active from the moment you sign off.

Replacement Doors Pricing in Palm Beach

Replacement door costs in Palm Beach run higher than the Florida state average, for a straightforward reason: the county’s wind-borne debris zone requirements push nearly every project toward impact-rated products, which cost more than standard doors but also do substantially more work – blocking wind, noise, UV, and intruders simultaneously.

Here’s an honest breakdown of what homeowners in Palm Beach typically pay:

What moves your number up or down:

• Opening size and configuration. Non-standard rough openings – arched, oversized, or paired with transoms – require custom-ordered units and additional labor.
• Existing frame condition. Homes in Palm Beach’s older historic neighborhoods sometimes have frame damage that isn’t visible until the old door comes out. We price transparently if that happens.
• Glass package. Decorative impact glass, low-E coatings, and obscure glass options all affect product cost, but they also affect long-term energy performance and curb appeal on a home where those details matter.
• Hardware upgrades. Multi-point locking systems, custom handlesets, and smart-lock integration add to the total but are worth considering at replacement time since retrofitting later costs more.
• Permit fees. Palm Beach building permits for door replacements are typically in the $150-$400 range depending on project valuation. We include this in the upfront quote.

All quotes are free. There’s no trip charge for homes inside Palm Beach County. If you’ve already received a written estimate from another contractor, we offer a free second opinion – no pressure, just an honest read on whether the scope and price make sense. Seniors and veterans receive a permanent 10% discount on all work, and any repair component over $200 qualifies for $40 off. Call (561) 831-7863 for an exact number – estimates are free and the quote you get is the price you pay.

FAQs – Replacement Doors

How long does a replacement door installation take in Palm Beach?

Most single-door replacements take four to six hours on installation day, assuming the rough opening and frame are in good condition. If we find frame rot or structural damage once the old door is removed, that adds time – usually a half to full additional day depending on severity. The longer part of the timeline is typically lead time on the product: two to four weeks for most impact-rated units ordered through our PGT, CGI, or Therma-Tru accounts. When you call us at (561) 831-7863, we can give you a realistic timeline based on current product availability.

Do I need a permit to replace a door in Palm Beach?

Yes, in most cases. Palm Beach County requires a building permit for Storm & Exterior Doors, and the new door must meet impact-resistance requirements under Florida Building Code Section 1609. Homes in the Town of Palm Beach itself may have additional historic district review requirements depending on the property. We handle the permit application as part of our process and schedule the required inspection – you don’t have to coordinate that separately. Skipping the permit is not something we do; it creates real liability for a homeowner when the house sells or makes an insurance claim.

Is it worth replacing a door versus repairing it in Palm Beach?

Repair makes sense when the door slab and frame are structurally sound and the problem is limited to hardware, weatherstripping, or a single point of damage. But if the frame has rot, the door fails its impact rating, or the unit is more than 20 years old, replacement almost always costs less over a five-year horizon than ongoing repairs – and it brings the door into compliance with current Palm Beach County code. We’ll give you an honest assessment during the free estimate; if repair is the right call, we’ll say so. Call (561) 831-7863 to schedule a look.

Which door brands do you install for replacements in Palm Beach?

We’re authorized installers for Therma-Tru, PGT, and CGI, among others – eight brands total. For most Palm Beach replacement jobs, we recommend Therma-Tru fiberglass for homes where salt-air corrosion resistance and curb appeal are priorities, and PGT or CGI impact-rated units where wind load and Miami-Dade NOA compliance are the primary drivers. We also install French & Double Doors when the opening and architecture call for them. The right brand depends on your specific opening, your home’s architecture, and your budget; we’ll walk you through the options without pushing you toward a product that doesn’t fit your situation.

Why Palm Beach Homeowners Choose Winslow

Ed’s name is on the door – and on every job we do. That means when you call about a replacement door at a home in Phipps Estate or along the North End, you’re not getting a call-center rep reading from a script. You’re talking to a team that has been doing this work in Palm Beach since 2011, knows the local permit office, knows which products hold up to the Intracoastal salt air, and will still be here in five years if you need us.

Every technician we send is background-checked and arrives in uniform. You’ll know who’s coming before the truck pulls up. The 36500-Day Done Right Promise is not a marketing phrase – it’s Ed’s personal commitment that if something isn’t right, we fix it. No runaround, no voicemail loop, no waiting for a franchise office to approve a callback.

For full context on everything we do with exterior doors – new construction, specialty configurations, and more – visit our home page or read through the complete Door Installation in Palm Beach service overview.

Call (561) 831-7863 today for a free, no-obligation estimate on your replacement door. Someone will answer – day or night.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach since 2011.