Custom & Geometric Windows in Jupiter - Free In-Home Measure, Written Price

Fast, Reliable Custom & Geometric Windows Across Jupiter

Custom and geometric window replacement in Jupiter runs roughly $2,500 to $5,000 per opening for true impact-rated custom shapes, with whole-home packages typically landing between $8,000 and $25,000 depending on how many units and how large they are. That’s the honest range before anyone measures your rough openings. Jupiter sits entirely inside Florida’s Wind-Borne Debris Region, so every replacement, even a single arched unit, must carry impact-rated glazing and the Florida Product Approval numbers to prove it. Call (561) 831-7863 and we’ll measure, spec, and price your exact openings in writing before any money changes hands.

Call (561) 831-7863

We work in Jupiter every week, from River Park to Abacoa to the streets east of U.S. 1 near the Inlet. We know the architecture, the review boards, the salt air, and the code. That local knowledge changes what gets ordered, what gets approved, and what survives the next ten hurricane seasons.

Why Winslow Windows & Doors Is Jupiter’s Preferred Custom & Geometric Windows Company

Winslow Windows & Doors has been locally owned and owner-operated since 2011. Ed Winslow’s name is on the door, and Ed’s word stands behind every unit we put into a Jupiter home. We’re not a franchise with a call center. We’re the people who answer the phone at 2 a.m., show up in a marked truck with a uniformed, background-checked technician, and hand you a line-item quote you can actually read.

Jupiter customers keep calling us back for one reason: we know this town’s rules better than anyone. Abacoa has architectural review standards that restrict frame colors and profiles. East-side neighborhoods near the Intracoastal demand marine-grade hardware. A 1960s CBS ranch in Jupiter Heights has completely different rough-opening conditions than a 2005 stucco home in Abacoa. We’ve worked all of it, and we spec every job to the exact street, elevation, and review-board reality of the address.

We file the architectural review submittal packet ourselves. We hold the tear-out until the committee signs off. And the 36500-Day Done Right Promise means if something isn’t right after installation, we come back and make it right. That’s not marketing language. It’s how Ed runs the company.

Our Custom & Geometric Windows Services in Jupiter

Every custom or geometric project starts the same way: we walk the opening, check the framing, verify the design pressure requirements for that specific elevation, and pull together a submittal packet that Jupiter’s architectural review boards will actually approve. Here’s what we do most often in Jupiter.

Custom Impact Windows

The critical fact most Jupiter homeowners miss: every custom shape, whether it’s a trapezoid, a circle-top, or a huge radius unit, still has to meet Florida’s Wind-Borne Debris Region requirements. That means impact-rated laminated glass, a Florida Product Approval number per configuration, and frames engineered to hold that glass at the wind speeds Jupiter sees during a storm. We spec these from PGT and CGI, the two Florida manufacturers whose product lines have the broadest NOA and Florida Product Approval footprints for non-rectangular openings.

Geometric & Shaped Windows

Triangles, pentagons, parallelograms, rake-topped gable units. Jupiter homes built in the 1980s and 1990s used these shapes heavily in entryways and great rooms, and most of those originals are now failing at the seal or the frame. The hardest part isn’t fabrication, it’s the review submittal. A geometric shape with the wrong frame color or profile gets bounced by the board and you wait another six to eight weeks for a reorder. We’ve learned to submit finish samples with the packet the first time.

Arched & Curved Windows

True radius and eyebrow windows are the most expensive custom shapes we install in Jupiter, and also the most likely to leak when the original frames give out. Within a mile of the Jupiter Inlet or the Intracoastal Waterway, standard aluminum on an arched opening will pit and corrode in five to seven years. Salt spray gets behind the glazing, and suddenly you’ve got water in the wall and delamination in the glass. We use anodized or PVC-clad frames and marine-grade stainless hardware on every coastal arched unit, no exceptions.

Oversized Openings

Floor-to-ceiling picture walls, wide sliding-glass replacements with fixed geometric transoms above, and ten-foot-plus head walls all need serious engineering. Jupiter’s wind zone means a huge opening on the second story of an Abacoa home carries a higher design pressure requirement than the same window on a ground-floor River Park ranch. We calculate the PSF rating for the exact opening and elevation before we ever order glass. Ratings above +/-100 PSF don’t exist in this market for residential work, and anyone quoting one is padding the spec.

Trusted Brands We Service in Jupiter

We’re an authorized installer for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Jupiter’s custom and geometric work specifically, we lean on PGT and CGI for impact-rated shapes, with ES Windows and ECO Window Systems for larger aluminum-clad designs where the architectural review board wants a specific finish or profile. Because we install these brands in Jupiter every month, we know which frames the Abacoa boards will accept and which ones they’ll reject, which saves you a reorder cycle and six weeks of waiting.

Common Custom & Geometric Windows Problems We See in Jupiter Homes

• Review board rejection for non-matching finishes. Abacoa and several east-side HOA boards in Jupiter reject custom geometric shapes when the frame color or profile doesn’t match the existing elevations. If the submittal packet lacks a finish sample, you lose six to eight weeks on a reorder. We include samples with every packet.
• Salt-air frame failure within a mile of the Inlet. Standard aluminum on arched and oversized openings near the Jupiter Inlet or the Intracoastal pits and corrodes in five to seven years. The laminated glass interlayer then absorbs moisture and delaminates, which ruins the entire unit from the inside out.
• Wrong glass spec for solar gain. Homeowners order a custom shape with standard low-E glass, only to have the architectural review board require a different SHGC or tint because they’re checking solar gain against the street’s specific elevation. Jupiter’s 246-plus sunny days a year make this a real factor.
• Undersized original framing in 1960s CBS ranches. River Park, Jupiter Heights, and the blocks near the Inlet are full of 1960s to 1980s concrete block homes where the original window openings were framed for thin aluminum jalousies. A custom oversized unit often needs header reinforcement before the new frame goes in.

Pricing for Custom & Geometric Windows in Jupiter, FL

What Custom & Geometric Windows Costs in Jupiter

For standard rectangular impact windows in Jupiter, expect roughly $800 to $1,500 per window installed, with single-hung impact units coming in at $900 to $1,800. Large or custom openings start around $2,500 and climb to $5,000 or more for complex geometric shapes with curved glass. Whole-home packages across Jupiter run $8,000 to $25,000 and up depending on how many openings and how large they are. What moves the price in Jupiter specifically: your wind zone (the entire city is in the Wind-Borne Debris Region, but second-story openings and east-facing elevations near the Intracoastal carry higher design pressures), the frame material your review board accepts, and whether you’re close enough to the Inlet to need marine-grade hardware and anodized frames. We don’t inflate these numbers into a “free quote” trap. We measure, we spec, we hand you a written price, and that’s the price. Call (561) 831-7863 to schedule the free measure.

Florida Pays You Back

Florida has real incentive programs for impact window upgrades, and they stack. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation improvements, which includes impact-rated windows and doors. Florida also exempts impact-resistant windows and doors from sales tax. On the federal side, the 25C energy credit covers 30% of product cost up to $600 per year on qualifying energy-efficient units. And after a wind-mitigation inspection (usually $75 to $150), most Jupiter homeowners see windstorm premium credits averaging around 25% on the windstorm portion of their policy. We’ll point you to the programs, but your carrier and the state set the final numbers. We never promise a specific dollar amount on a rebate.

One quick comparison for Jupiter homeowners deciding between permanent impact windows and hurricane shutters: shutters only protect the glass when you’re home to deploy them, and they do nothing for energy efficiency, noise, or daily UV exposure. Impact-rated custom geometric windows protect your home around the clock, year-round, with no panels to haul out before a storm and no hardware rails bolted to your exterior walls. Jupiter’s shoreline homes get pounded by sun and salt every single day, not just during named storms. Permanent impact windows handle all of it. And one thing a lot of Jupiter buyers don’t consider until the review comes back: shutters change your exterior elevation, and many HOA boards in Abacoa will reject certain shutter profiles on sight. Impact windows keep the architecture clean.

We Also Serve Cities Near Jupiter

Winslow Windows & Doors serves all of northern Palm Beach County with the same local knowledge and the same 36500-Day Done Right Promise. If you’re in Palm Beach Gardens, North Palm Beach, West Palm Beach, or Palm Beach, we handle custom and geometric impact work there too. Custom & Geometric Windows in Jupiter remains our core market, but our crews cover the full region, and dispatch is coordinated from our South Florida office so scheduling stays simple.

FAQs - Custom & Geometric Windows in Jupiter

The One Local Insight That Changes Everything

Every custom or geometric window replacement in Jupiter, even a single unit, legally requires impact-rated glazing because the entire city sits within Florida’s Wind-Borne Debris Region under the Florida Building Code. Yet builders rarely flag this until the architectural review submittal is already in motion, which is exactly when most Palm Beach County installers get stopped by the HOA. A homeowner walks in with a vision for a big, beautiful geometric window, and the contractor writes the order without checking the wind zone or the board’s finish requirements. The board bounces it. The glass gets reordered. The homeowner waits two months and pays twice for the privilege. We’ve seen it so many times in Jupiter that we front-load the entire process: we check the wind zone first, spec the correct impact glass and frame, pull the Florida Product Approval numbers, and file the packet with finish samples before any fabrication begins.

There’s a field story from River Park that captures how this works. On a 1970s CBS ranch near the Intracoastal, we replaced a set of original single-pane aluminum jalousies with custom trapezoid impact units from PGT, using marine-grade stainless hardware and anodized frames after showing the homeowner the chalky, pitted corrosion on the old jambs. The submittal packet went to the architectural review board with our drawings and Florida Product Approval numbers, and we held the tear-out until the committee signed off, so the rough openings were never exposed to salt air longer than one afternoon. That’s the difference between a contractor who knows Jupiter and one who just drives up from somewhere else.

Abacoa adds another layer. The late-1990s planned community has architectural review standards that restrict visible frame colors and profiles, so a custom geometric window that might sail through in West Palm Beach can get rejected in Abacoa for a finish that’s one shade off. East-side neighborhoods like Jupiter Heights and the blocks near the Inlet have no such review boards, but they’ve got salt air that eats standard aluminum in half a decade. Jupiter is not one market. It’s three or four micro-markets stacked on top of each other, and each one changes the material spec.

And the sun makes everything harder. Jupiter ranks among the sunniest cities in the United States, averaging over 246 sunny days per year. That’s brutal on low-e coatings, glazing films, and vinyl frames. UV degradation happens faster here than almost any inland Florida market. Combine that with salt spray off the Jupiter Inlet and the Intracoastal Waterway, and you’ve got frame oxidation and seal failure as the dominant failure modes driving replacement cycles. A custom geometric window in Jupiter isn’t just a design statement. It’s a piece of engineering that has to withstand UV, salt, wind-borne debris, and a review board’s aesthetic judgment all at once.

Call (561) 831-7863 for a free in-home measure and a written quote. Ed Winslow’s name is on the business, and every job we do in Jupiter has to meet his standard before it meets yours. The one down the road.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Jupiter, FL since 2011.