Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Shingle, Tile & Metal Roofing in Palm Beach: What to Know First
Therma-Tru shingle, tile, and metal roofing in Palm Beach is work we handle as an independent Therma-Tru service provider, with most residential jobs completed in two to four working days depending on roof pitch, material availability, and weather. Pricing for shingle roofing starts around $8,900, tile roofing between $14,500 and $38,000 for a typical Palm Beach home, and metal roofing from $17,000 to $45,000 or more for standing seam systems. You’ll get a written, line-item quote before we start, and that number doesn’t move unless you change the scope. This page is for Therma-Tru owners in Palm Beach who want to know what their roof needs, what it should cost, and who to call. That’s us at (561) 831-7863.
If you own a Therma-Tru door system on a home here, you already appreciate the brand’s focus on structural integrity. Roofing work on homes with Therma-Tru products means we pay attention to penetrations, flashing, and door-to-roof transitions differently than a roofing-only outfit would. A roof is only as good as its seams, and in Palm Beach salt air, those seams work hard every single day.
How Therma-Tru Roofing Products Fail - and How We Fix Them
- Flashing separation at entry thresholds. On Palm Beach homes with Therma-Tru Classic-Craft or Pulse door systems, we regularly find the metal flashing between the door frame and the lower roof edge has pulled away. It’s the salt-heavy humidity working on the sealant, not a defect in the door itself. Pull the old flashing, clean the substrate, install new corrosion-resistant flashing, and re-bed the seal with a marine-grade urethane that handles our coastal air.
- Wind-driven rain intrusion around dormer valleys on homes with tile roofs. Palm Beach tile roofs, including S-shaped barrel tile profiles common in older El Cid and Phipps Plaza neighborhoods, fail first where the valley meets the headwall. Therma-Tru Fiber-Classic door frames near these valleys often show water staining at the base. We re-flash the valley with a wider profile and verify the secondary water barrier under the tile extends at least 24 inches up the headwall.
- Underlayment breakdown under metal roof panels near the coast. Metal roofing in Palm Beach, especially stone-coated steel systems in the Estate Section, suffers premature underlayment failure when the original installer used standard felt instead of a high-temp synthetic. Symptoms include rust-colored drips at panel laps over the door canopy. We remove panels in the affected section, replace the underlayment with a self-adhering synthetic, and re-install the original panels if they’re sound.
- Compromised seals at pipe boots and vent collars on Therma-Tru homes with shingle roofs. Neoprene pipe boots crack from UV exposure in about five to seven years here, faster than anywhere else in Florida because of the sun angle on south-facing roof planes. We use silicone boots with a heavier wall thickness and verify the shingle course overlap before securing the base.
- Tile slippage and cracking above Therma-Tru Smooth-Star doors in older Palm Beach homes. Homes built in the 1990s along Seaview Avenue often have tile roofs installed before screed modifications. Tile lips crack under foot traffic or storm debris, and the crack runs back to the nail line. We replace the broken tile with a profile match from our supplier in Riviera Beach and inspect the surrounding field for loose fasteners before moving on.
Our Therma-Tru Shingle, Tile & Metal Roofing Process
- 1
Call and talk to a person, not a phone tree. We answer 24/7. You describe what’s going on with your roof, whether it’s a leak near your Therma-Tru fiberglass entry door or you’re planning a full replacement before hurricane season.
- 2
On-site inspection with photos. We walk the roof, check the flashing, underlayment, fastener patterns, and any Therma-Tru product penetrations. We photograph everything and show you what we find, so you’re not taking our word on a problem you can’t see from the ground.
- 3
Parts decision. For shingle and tile work, we use roofing materials that meet or exceed Palm Beach County code: Miami-Dade rated underlayment, stainless fasteners, and profile-matched tiles. For Therma-Tru-specific components like door-to-roof flashing, we specify the correct width and gauge rather than forcing a generic piece into place.
- 4
The work itself. Our crew protects your landscaping, removes the old material if it’s a replacement, installs the new underlayment, flash, and roofing material, and does a dry-run water test on every seam and penetration before we call the job done.
- 5
Inspection, photos, and the 36500-Day Done Right Promise. We walk the finished roof with you, hand you photos of the work, and leave you with our guarantee: if it’s not done right, we make it right. That’s the standard.
What Therma-Tru Shingle, Tile & Metal Roofing Costs in Palm Beach
Here are real ranges for the Therma-Tru homeowner in Palm Beach, based on jobs we’ve done locally.
- Single flashing repair at a Therma-Tru door threshold: $450-$900, depending on access and the condition of the surrounding substrate.
- Underlayment repair under tile, 100-200 square feet: $1,200-$2,600, tile removal and replacement included.
- Full shingle roof replacement, 2,000 square foot home: $8,900-$16,500, depending on shingle grade and decking repairs.
- Full tile roof replacement, 2,000 square foot home: $14,500-$38,000, depending on tile profile and whether the original tile is salvaged for re-use.
- Standing seam metal roof, 2,000 square foot home: $17,000-$45,000, depending on seam height, gauge, and whether a batten system is required.
What moves the price: roof pitch above 8/12, the number of penetrations, decking replacement if the existing plywood is delaminated from Palm Beach humidity, and whether you want architectural shingles versus a three-tab. We don’t pad the price to cover surprises. The quote is the quote. Call (561) 831-7863 for a free estimate and we’ll put numbers on paper the same week.
Why Palm Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work
We’ve been at this since 2011, and Ed Winslow’s name is on the truck, not a franchise agreement. When someone in Palm Beach calls us about a leak near their Therma-Tru entry door or a tile roof that lost its underlayment in the last storm, they get background-checked, uniformed techs who know the difference between a flashing issue and a roofing failure. We don’t sell you a new roof when a repair does the job. And if we quote a repair, we stand by the number.
Beyond Therma-Tru, our crews work on PGT, CGI, CWS, and ES Windows products. That matters when your roof and your window or door systems share a wall, because we see the whole opening, not just the part that’s leaking today. The 36500-Day Done Right Promise applies to every roof we touch. Published address, published license number, and a phone line answered by a person at 2 a.m. That’s the way it should work.
FAQs
No. Re-flashing or re-sealing the transition between your roof and your Therma-Tru door frame is maintenance, not modification, and it doesn’t void the door’s warranty. We do the work without altering the door frame, the sill, or the threshold. If you’re concerned, keep the photos we give you after the job. Call (561) 831-7863 and we’ll walk you through exactly what we did.
We answer the phone 24/7 and can usually have a tech on your roof in Palm Beach within 24 to 48 hours for non-emergency work. Emergency leaks are prioritized. The phone rings until a person answers, not a voicemail.
For the roofing materials themselves, Therma-Tru doesn’t manufacture shingles or tiles, so the relevant spec is Miami-Dade or Florida Building Code compliance, not brand. For door-adjacent flashing, we match the profile and gauge to the original installation and use stainless or aluminum rather than galvanized, which rusts faster than most Palm Beach homeowners realize. If a specific part is still under warranty, we’ll tell you before we touch it.
If the underlayment has failed in more than one area, or if your tile roof is over 30 years old, replacement usually saves money over repeated repairs. Palm Beach tile roofs handle wind well, but the underlayment underneath is the actual water barrier, and once it’s compromised in one spot, the rest is not far behind. We’ll show you photos of the underlayment condition and give you an honest recommendation, repair or replace, based on what we’d do at Ed Winslow’s own house.
No. Our written quote is our word. The only thing that changes the number is a change you ask for or unseen structural damage we could not have identified from the surface inspection, and we show you photos of that before anyone touches a tool. Ed’s saying on the truck applies here too: “My name’s on the truck. That’s reason enough to do it right.”
If you’ve got a Therma-Tru home in Palm Beach and the roof is asking questions, call us at (561) 831-7863. We’ll come out, look it over, and give you a free written estimate. No pressure, no sales pitch, just the answer. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.