Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Why Palm Beach Homeowners Choose PGT Windows & Doors
Winslow Windows & Doors provides independent PGT repair in Palm Beach, including service and installation throughout the island’s Mizner-era estates and the condominium corridors along the Intracoastal. We’re not a PGT factory service center, and we’re not tied to any manufacturer’s schedule. We’re a local crew that works on PGT products every week, and we know how Palm Beach’s two-front salt exposure and architectural review requirements change the way these windows and doors should be serviced. Call (561) 831-7863 when you need someone who actually understands PGT hardware, glass, and coastal failure modes.
Why Trust Winslow Windows & Doors for Your PGT Windows & Doors?
Our technicians have spent years pulling apart PGT WinGuard and SpectraGuard units in West Palm Beach and throughout the coastal area. That matters because PGT products fail differently here than they do in Orlando. Salt air attacks aluminum tracks and stainless hardware far faster on a barrier island than inland, and sun load through east- and west-facing lanais warps vinyl Eze-Breeze panels in ways a manufacturer’s generic troubleshooting guide never mentions. Ed Winslow, our owner, has been doing this work since before Winslow Windows & Doors opened in 2011. He grew up in Miami learning how salt and humidity chew through window hardware, trained in construction technology at Miami Dade College, and has spent nearly two decades inspecting and repairing impact-rated fenestration on real job sites across Palm Beach County. When you call us about a PGT window or door, you’re talking to people who have already fixed that exact problem on a similar building two blocks from the ocean.
As an independent PGT service provider, we’re free to be honest about what a repair should cost and whether a component is worth saving. We’re not accountable to PGT. We’re accountable to you. Ed’s name is on the door, and on every job we do.
Common PGT Windows & Doors Problems We Fix in Palm Beach
- Failed laminated glass seals on WinGuard Aluminum units exposed to salt air. Palm Beach’s constant salt spray works into the edge seals of laminated impact glass, especially on ocean-facing elevations and buildings within a few hundred yards of the surf. Once moisture penetrates, you’ll see clouding between the lites. We replace the insulated glass unit using OEM or equivalent laminated glass spec’d for the original wind-load rating, and we re-seal the frame edge before reinstalling.
- Cracked or separated vinyl welds at sash corners on SpectraGuard double hungs. Florida sun bakes the vinyl corners on SpectraGuard sashes, and after years of thermal cycling, the welded corners can develop hairline cracks or separate entirely. This is a known failure point on older SpectraGuard units, and it’s often misdiagnosed as a balance problem. We re-weld or reinforce the corners, and where the sash is too far gone, we order a new sash rather than replacing the entire frame.
- Stripped or corroded roller assemblies on WinGuard single hung impact sashes. Salt air gets into the roller track and seizes the carrier wheels. Last month our tech pulled a corroded WinGuard Aluminum single hung from a Singer Island condo, where the salt air had eaten through the roller track and seized both sash carriers. We replaced the track with marine-grade stainless, swapped in new OEM rollers, and rehung the sash. No frame pull, no stucco repair, and the window now glides with one hand.
- Warped or binding Eze-Breeze panels from sun load on east/west exposures. Eze-Breeze porch enclosure panels are vinyl, and Palm Beach sun on an east- or west-facing lanai will warp them over time. Panels that once slid easily start catching on the top track, and eventually they bind. We can often straighten a slightly warped panel with new channel guides, but once the panel has taken a permanent bow, replacement is the only fix that will last.
- Stiff or seized balances on WinGuard and SpectraGuard double hungs. The constant humidity cycling on the island causes the coil or spiral balances inside these windows to lose tension or corrode. Homeowners often assume the window needs replacing when it’s actually a $40 balance cartridge. We stock common balance sizes locally in Palm Beach so we can usually restore smooth operation the same visit.
PGT Parts & Our Repair-vs-Replace Approach
We source genuine PGT replacement components when they’re available, especially for WinGuard laminated sashes and roller assemblies. These parts carry the wind-load and impact certification your building needs for ARCOM compliance, so we won’t substitute an uncertified part in those applications. For trim, weatherstripping, and certain balance systems, we’ll specify commercial-grade aftermarket hardware when it outperforms the original spec. A marine-grade stainless roller track will outlast the factory aluminum track in Palm Beach salt air, and that’s a materials fact, not a brand preference.
Our rule is simple: if the frame is sound, we repair. If the sill is pitted through or the laminate is delaminating across multiple lites, we recommend full-frame replacement. We’ll show you the corrosion or the delamination on site so you can see exactly what we’re seeing. No vague “it’s old” language. Call (561) 831-7863 for a straight answer on your PGT windows and doors in Palm Beach.
Our PGT Service Process - Step by Step
- 1
Diagnosis and load-path check. We inspect the sash, frame, tracks, and seals. For impact-rated PGT units, we verify whether the window still maintains its design pressure rating or whether the glass package needs replacement. In Palm Beach, we also check for salt-driven frame pitting around the weep holes and the sill.
- 2
Repair or replacement scope. We quote the repair with line-item pricing before we start. If it’s a full replacement, we confirm the PGT product line, glass package, and any ARCOM-specific requirements like divided-lite pattern or finish color before ordering.
- 3
Repair or install. We replace OEM parts where certification matters, upgrade to marine-grade hardware where salt is the enemy, and install new units to the original opening tolerances. On Palm Beach island jobs, we bag and protect surrounding stucco and trim exactly the way ARCOM expects.
- 4
Operational test and sealing. Every repaired or replaced window is cycled multiple times, checked for square, and re-sealed at the frame edge. We run water tests on ocean-facing installations.
- 5
Warranty and the 36500-Day Done Right Promise. We document the work and stand behind it. If it’s not done right, we make it right. That’s Ed Winslow’s promise, and it’s good for 100 years.
PGT Products We Service & Install in Palm Beach
We service and install the full range of PGT residential product lines: WinGuard Vinyl and WinGuard Aluminum impact-rated windows, SpectraGuard vinyl windows, and Eze-Breeze porch enclosure systems. Our Palm Beach work concentrates on Impact Windows-including single hung and horizontal roller and sliding styles-because those are the products most common in island condos and Mizner-style estate homes. We keep common PGT balances, rollers, weatherstripping, and lock assemblies stocked locally so most repairs don’t wait on a freight delivery.
We Also Service These Brands
PGT is the brand we service most often in Palm Beach, but our crew is factory-trained and experienced across the impact-rated market. We also work on CGI, CWS, ES Windows, and ECO Window Systems products. When a building has mixed fenestration or a homeowner wants a comparison quote, we can handle the whole scope without juggling subcontractors.
FAQs - PGT Windows & Doors Service in Palm Beach
You can replace just the insulated glass unit on most PGT WinGuard windows. We remove the old glazing bead, take out the failed IG unit, and install a new laminated IG unit matched to the original wind-load and impact rating. If the sash frame itself is corroded, cracked, or no longer square, we’ll recommend a new sash instead. But on most Palm Beach buildings, an IG-only replacement saves thousands over a full sash or full window replacement. Call (561) 831-7863 and we’ll tell you which path applies to your window.
That stiffness is almost always one of three things: a failed balance cartridge, a cracked corner weld, or a build-up of salt and dust in the jamb track. We see all three constantly in Palm Beach, especially in units facing the ocean. The fix is usually a new balance or a track cleaning and lubrication, not a new window. If it’s a cracked weld, we can often repair it without pulling the frame.
Yes, we replace individual Eze-Breeze panels. You don’t need to re-do the whole enclosure. We order the replacement panel to match your existing track profile and tint, then swap it in. If the panel is binding because of warping, we’ll check the track and channel guides at the same time, because replacing the panel without addressing a bent track will just ruin the new panel. Call (561) 831-7863 for a free estimate on a single Eze-Breeze panel replacement in Palm Beach.
You need to verify three things: the glass must still carry its permanent etch or label identifying it as impact-rated, the frame must not be bent or pitted to the point where the glass edge is unsupported, and the original design pressure rating must not have been compromised by aftermarket parts. We perform this three-point check on every storm-repair job in Palm Beach. If any one of them fails, the window no longer meets code and needs replacement, not repair.
It’s usually not the screen. It’s the top track having been stretched or bent, often from someone forcing a stuck screen or from salt corrosion distorting the channel profile. Once the channel loses its grip, the screen will keep popping out no matter how many times you push it back in. We fix it by replacing or re-forming the top track section, and that solves the problem permanently.
In Palm Beach, a typical PGT service call for a single WinGuard or SpectraGuard window ranges from about $180 to $450 depending on whether we’re replacing a balance, a roller assembly, or a failed IG unit. A full WinGuard impact window replacement runs $900 to $2,200 per opening depending on size, glass package, and ARCOM-required finish details. Eze-Breeze panel replacement is usually $250 to $700 per panel. These are honest ranges based on island jobs we’ve priced recently. For an exact quote on your PGT windows or doors, call (561) 831-7863. Estimates are free, and there’s no trip charge inside our home county.
Book Your PGT Service in Palm Beach, FL
If your PGT windows or doors are showing salt corrosion, failed seals, or binding sashes, don’t wait until a storm test exposes the problem. Call Winslow Windows & Doors at (561) 831-7863. A live person answers, every time. We’ll schedule a diagnostic, quote you an honest price, and fix it right. My name’s on the truck. That’s reason enough to do it right.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After