ES Windows Custom & Geometric Windows Nationwide | Winslow Windows & Doors

ES Windows Custom & Geometric Windows in Palm Beach: What to Know First

As an independent ES Windows service provider, we handle custom and geometric window projects across Palm Beach, from arched transoms on El Brillo Way estates to trapezoid fixed units in oceanfront condos. Most custom-shaped ES Windows repairs or replacements in Palm Beach run $850 to $4,200 per opening depending on size, glass package, and frame complexity, and we typically complete most jobs within two to three weeks once measurements and engineering are confirmed. If you own an ES Windows product and the shape is anything but a standard rectangle, call (561) 831-7863 for a free estimate. This page is for Palm Beach homeowners dealing with curved tops, radius corners, odd angles, and oversized openings where a standard window simply won’t fit.

Call (561) 831-7863

Key Takeaways

• We service and install ES Windows custom and geometric units as an independent provider, not a manufacturer affiliate.
• Custom shapes cost more than stock rectangles because every frame, glass lite, and seal is built to order.
• Palm Beach salt air and intense UV exposure accelerate seal failures on ES Windows radius and arch units faster than inland locations.
• Every job carries the 36500-Day Done Right Promise and a published address, license number, and Ed Winslow’s name behind it.

How ES Windows Products Fail - and How We Fix Them

• Radius and arch unit seal blowout on ES Windows’ Premium ES Series. The curved glass lites on these units sit under constant thermal stress in Palm Beach, where morning sun hits one side of the arch while the opposite stays shaded. That uneven expansion separates the edge seal from the spacer bar, leaving condensation or haze trapped between panes. We replace the insulated glass unit with a locally fabricated equivalent cut to the exact radius, then re-bed it in marine-grade sealant rather than the standard butyl the factory uses. It holds up longer in this climate.
• Geometric frame corner separation on the ES Windows 5000 Series. Trapezoid, pentagon, and triangle units concentrate stress at the mitered corners of the aluminum frame. After a decade of Palm Beach humidity and salt, the corner keys can loosen and the frame joint opens just enough to let water weep in. We disassemble the corner, replace the key, re-apply structural adhesive, and re-seal the joint with a polyurethane that handles the movement better than the factory silicone.
• Fogging on oversize custom ES Windows wall units facing the ocean. ES Windows builds some of the largest fixed architectural units in the county, and the bigger the lite, the more the glass bows and breathes with pressure changes. On direct ocean-facing elevations in Palm Beach, that pumping action draws salty, humid air through micro-fissures in the sealant and fogs the unit from the inside. The fix is a full deglaze, new dual-seal IGU, and a reinforced setting-block layout that reduces bowing. You can’t just drill and defog these, it never lasts east of US-1.
• Hardware strain on ES Windows casement and awning units with custom trapezoid sashes. When a sash is not a simple rectangle, the operating hardware carries torsion it was never designed for. We see stripped operator gears and bent hinge arms on ES Windows outswing units in Palm Beach homes where architects specified angular sashes to follow a roofline. We replace the hardware with heavy-duty stainless aftermarket operators rated for the extra torque, and we re-balance the sash so the operator isn’t doing all the work.
• Fading and seal deterioration on ES Windows painted arch frames in south-facing exposures. The dark bronze paint on ES Windows custom arches takes a beating under Palm Beach’s UV load. Once the paint film thins at the apex of the curve, the underlying aluminum starts to oxidize. We strip, prime, and re-coat with a two-part urethane matched to the original ES Windows color code, then re-seal the glazing channel. It adds years for a fraction of a replacement’s cost.

Our ES Windows Custom & Geometric Windows Process

1. 1
   Call and a real person answers. You call (561) 831-7863, tell us what’s happening with the window, and we ask the right questions: shape, size, orientation, when you first noticed the problem. If you’re inside our home county, the trip charge is zero.
2. 2
   On-site measurement and diagnostics. We measure the opening down to an eighth of an inch, check the reveal on all four (or six, or eight) sides of a geometric unit, and identify the exact failure mode. For custom shapes, we also check square, plumb, and level at every corner, because a frame that’s racked by even a degree will never seal right.
3. 3
   Parts decision: OEM versus quality aftermarket. For glass packs and seals on standard ES Windows units, we use ES Windows factory components where available. For custom radius and geometric work where factory lead times run ten to fourteen weeks, we source locally fabricated equivalents that match the original thermal and structural specs, often cutting your timeline by two-thirds without voiding the workmanship coverage on our end.
4. 4
   The repair or replacement. Frame gets prepped, old sealant is removed, the new unit goes in square and true, and the glazing is bedded with sealants spec’d for Palm Beach’s salt and UV exposure. We don’t rush the cure time, because a seal that’s installed fast and fails in eighteen months isn’t a deal, it’s a repeat visit.
5. 5
   Test and verify. We check for air infiltration with a smoke pen, run the operating hardware through full travel, and verify drainage. You see it done before we load the truck.
6. 6
   The guarantee follows the truck. Every ES Windows job we touch carries the 36500-Day Done Right Promise. If it’s not done right, we come back. That’s not a warranty buried in fine print. That’s Ed’s word.

What ES Windows Custom & Geometric Windows Costs in Palm Beach

Custom and geometric ES Windows work in Palm Beach is priced by the opening, not by the hour, so you know the number before we start. Here are honest ranges for the most common scenarios:

• Radius or arch fixed window replacement (up to 60 inches wide): $1,200 to $2,800
• Trapezoid, pentagon, or triangle fixed unit (standard residential size): $850 to $2,200
• Oversized architectural fixed window or wall unit (ocean-facing or estate-scale): $2,800 to $6,500
• Custom casement or awning with geometric sash (including hardware upgrade): $1,400 to $3,400
• Glass-only replacement for fogged radius or arch unit: $450 to $1,100

What moves the price: glass package (impact-rated adds $400 to $900 per opening), frame finish, access difficulty on second-story or ladder work, and whether the unit needs full removal or can be repaired in place. You’ll get a written, line-item quote before any work begins. Call (561) 831-7863 to schedule a free estimate, and remember the $40-off-any-repair-over-$200 offer applies, along with the 10% discount for seniors and veterans.

Why Palm Beach Homeowners Call Winslow Windows & Doors for ES Windows Work

We’ve been doing this in Palm Beach since 2011, and Ed Winslow’s name has been on the door since day one. My name’s on the truck. That’s reason enough to do it right. When you call us about an ES Windows custom or geometric unit, you get a live person on the phone, 24/7, not a voicemail loop. The technician who arrives is background-checked and in uniform, and has worked on ES Windows plus PGT, CGI, CWS, and ECO Window Systems units, which means we understand how different manufacturers’ custom-shape tolerances interact. We’re locally owned with a published address and license number, not a franchise with a call center in another state. And if the job isn’t done right, the 36500-Day Done Right Promise means we make it right, period.

FAQs

Call Winslow Windows & Doors for ES Windows Custom & Geometric Windows in Palm Beach

If you own an ES Windows custom or geometric unit and something’s off, don’t wait until a small seal failure becomes a water leak inside your walls. Call (561) 831-7863 and a real person will pick up, day or night. We’ll schedule your free estimate, quote you a fixed price in writing, and stand behind every inch of the work. The one down the road.

Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Palm Beach and nearby areas.