CWS Sliding & Patio Doors Nationwide | Winslow Windows & Doors

CWS Sliding & Patio Doors: The Palm Beach Owner’s Guide

CWS sliding and patio doors in Palm Beach can be repaired or replaced, and Winslow Windows & Doors stocks rollers, handles, locks, tracks, and weatherstripping sized to fit most CWS frames. A full CWS patio door parts repair in Palm Beach typically runs $145 to $420 installed depending on which part failed, and we carry common components on the truck so one visit handles most jobs. The telltale sign that sends Palm Beach homeowners searching for parts: the door starts dragging, the lock won’t catch, or air starts leaking around the frame in the middle of a humid afternoon.

Call (561) 831-7863

We’re an independent Palm Beach shop, not a CWS dealer, which means we don’t have to push a full-door replacement when the real fix is a $40 roller pair. Ed Winslow’s name is on the business, and we’ve been matching CWS hardware to Palm Beach homes long enough to know which parts fail first and which ones are worth replacing before they leave you fighting a stuck door after a rainstorm.

Key Takeaways

• CWS sliding door parts we stock: rollers, tandem wheel assemblies, handles, lock sets, track caps, and weatherseals.
• Typical Palm Beach installed price: $145 to $420 for most single-part repairs.
• Same-visit service: most CWS part swaps are done in one trip.
• Standing offers: $40 off any repair over $200, free second opinions on written estimates, no trip charge inside Palm Beach County, and a 10% discount for seniors and veterans.

Which CWS Models This Applies To

CWS manufactures sliding and patio doors in a few distinct series lines, and the part you need depends almost entirely on which one you own. In Palm Beach, we see three groups most often: the Series 600 aluminum sliding door, the Series 700/750 impact-rated sliding door, and the hinged patio door line that shares some of the same handle and lock hardware. Rollers are not universal across these lines. A Series 600 roller assembly is narrower and slides on a single track design, while the 700 series uses a heavier tandem carriage because the impact glass adds significant weight. Put the wrong roller in a 700 door and you’ll be back under the door within a year, and so will we.

The fastest way to identify your CWS part is the label etched into the corner of the glass or the frame edge, which carries a manufacturing code that pinpoints the series and sometimes the production year. If the label’s worn off, which happens with salt-air exposure in Palm Beach, we measure the roller diameter and track profile on site. For handles and locks, CWS uses a few standard screw spacings across models, and we carry aftermarket equivalents that match the original footprint exactly. We also install genuine OEM parts when a homeowner prefers them, but we’re straightforward about when a quality aftermarket part will do the job just as well, usually at a lower price.

Signs Your CWS Sliding & Patio Doors Is Failing

• The door drags or sticks when you slide it. This is almost always a worn roller. Palm Beach humidity accelerates corrosion on steel roller bearings, and once one wheel grinds down, the door rides on the frame instead of the track, scoring the aluminum and making the problem worse every time you open it.
• The lock won’t catch or clicks but doesn’t engage. CWS lock sets depend on precise alignment between the hook bolt and the keeper. Years of thermal expansion and settling shift the panel by a millimeter or two, and suddenly the lock misses. The fix is usually a re-shim of the panel plus a new keeper, not a new door.
• You feel a draft or see daylight around the frame. Weatherstripping on sliding doors in Palm Beach takes a beating from UV, salt, and heat. Once the pile gasket flattens or tears, the door leaks conditioned air and lets moisture into the track. This one costs the least to fix and pays for itself on the electric bill.
• The handle is loose, floppy, or you have to lift it to lock. Inside a CWS handle, a small spindle connects the lever to the lock mechanism. That spindle wears into an oval shape over time. Replacing the handle assembly is a ten-minute job with the right part.
• Water pools on the interior side of the track. The track’s weep holes exist to drain rain out. In Palm Beach, those weep holes clog with leaf debris, salt crust, or sand from the beach. Cleaned and cleared, the drain works again. If the track is corroded through, that’s when we talk about track cap replacement.

Replacement Cost & What’s Included

CWS sliding door part replacement in Palm Beach runs between $145 and $420 installed. The spread depends on which part failed and whether you own an impact series, since heavier panels need pricier tandem rollers that carry more load. A roller swap usually lands in the $145 to $260 range, a new handle and lock set runs $165 to $280, and track work or a full weatherseal replacement can push closer to $350 to $420.

Every quote is a written, line-item price before we start. Labor is baked in, the part cost is separate and transparent, and no one adds a “surprise discovery” charge on the invoice. Palm Beach County customers pay no trip charge when we come to diagnose. The part warranty depends on manufacturer, but our labor carries the 36500-Day Done Right Promise, which means if something about our install isn’t right, we come back and make it right. Ed Winslow’s name is on the truck. That’s reason enough to do it right.

DIY or Call Us?

Sliding door rollers and handles are safer to work on than garage door springs, but there are still ways to hurt yourself or damage the door. The panel on an impact-rated CWS door weighs 200 pounds or more. Lifting it out without help or the right tilt technique can drop it on your foot or bend the frame. We’ve also seen Palm Beach homeowners snap a roller axle by forcing a corroded assembly out with the wrong tool. If you want to try anything yourself, adjusting the existing rollers is about as far as we’d recommend, and only if you can lift the panel safely.

For most CWS part failures, the smarter move is to have us match the part and install it properly. We show up with the right components, shim the panel back to square if needed, and test the slide and lock before we leave. Call (561) 831-7863 and we’ll confirm which part your door needs, quote you over the phone, and get it handled in one visit.

FAQs