Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Roof Replacement & Installation in Palm Beach: What to Know First
We provide independent CWS roof replacement and installation throughout Palm Beach, and most full replacements are completed in 3 to 5 working days once materials land and permits clear. A standard CWS asphalt shingle roof on a typical Palm Beach single-story home runs between $14,000 and $22,000, while tile and metal CWS systems start higher because of material and structural demands. If you’re reading this, you either have a CWS roof that’s failing or you’re considering CWS for a new build or re-roof. Either way, call (561) 831-7863 and a live person will answer, day or night.
How CWS Products Fail - and How We Fix Them
CWS makes a solid roof system, but Palm Beach humidity, salt air, and hurricane cycles expose weak points that you won’t read about in a product brochure. Here’s what we actually see on CWS roofs across Palm Beach:
- CWS asphalt shingle granule loss on ocean-facing slopes. The CWS architectural shingle line, particularly on homes east of Olive Avenue in Palm Beach, sheds granules faster than inland roofs. Salt spray and constant UV break down the asphalt binder. We catch it early during inspections and replace affected slopes before the fiberglass mat gets exposed and leaks start.
- CWS tile underlayment failure before the tile itself fails. This is the big one. CWS concrete and clay tile roofs in Palm Beach look fine from the curb, but the underlayment beneath them degrades in 15 to 20 years in our humidity. Homeowners don’t know until water stains appear on ceilings. We replace the underlayment, reset the CWS tile, and the roof gets another two decades. The tile often gets reused, which saves real money.
- Flashing separation at CWS roof-to-wall junctions. CWS flashing details rely on sealant that Palm Beach’s heat-and-rain cycles break down faster than the manufacturer’s estimates suggest. We see it most often where a second-story wall meets a first-story roof. Our fix re-flashes the junction with mechanical fastening and a higher-grade sealant than what came from the factory detail.
- CWS metal roof fastener back-out on standing seam panels. CWS metal roofing uses concealed fastener systems on some lines, but older CWS exposed-fastener panels have washered screws that back out over years of thermal expansion. Once a screw backs out, water finds the hole. We replace the fasteners with upgraded washered screws and re-seat panels, and we check the entire field for loosened rows while we’re up there.
- Improper original installation of CWS ridge vents. We repair a lot of CWS roofs in Palm Beach where the original installer cut the ridge opening too wide or too narrow for the CWS vent profile. That causes either restricted airflow (attic heat and moisture buildup) or water intrusion at the ridge in driving rain. We re-cut the opening to CWS spec and re-secure the vent with the right fasteners, not whatever was on the truck that day.
Our CWS Roof Replacement & Installation Process
Every CWS roof job in Palm Beach follows the same sequence, whether it’s a repair or a full tear-off and replacement. Here’s how it goes from the first call to the final walkthrough:
- 1
Call and diagnosis. You reach a live person at (561) 831-7863. We schedule an inspection, and a background-checked, uniformed tech shows up. We inspect the roof, the attic, and the existing CWS system, then give you a written line-item scope with zero trip charge inside our home county.
- 2
Parts decision. We lay out the options: OEM CWS components where they matter for warranty, and quality aftermarket equivalents where they match or exceed spec and save you money. You decide with real numbers on the table, not vague tiers.
- 3
Permits and scheduling. We pull all required Palm Beach permits and handle inspections. You get a start date and a completion date before we touch a shingle.
- 4
Tear-off and install. Our crew strips the old system, inspects and repairs decking where needed, re-flashes every penetration and junction, then installs the new CWS roof to manufacturer spec and local wind-load code.
- 5
Testing and inspection. We run water tests at penetrations, check the nailing pattern, verify edge metal and vent termination, and walk the finished roof before we call it done.
- 6
Final walkthrough and the promise. We walk you through what was installed, answer every question, and confirm the work is covered by the 36500-Day Done Right Promise. If it’s not done right, we make it right. Period.
What CWS Roof Replacement & Installation Costs in Palm Beach
Palm Beach CWS roof work pricing depends on system type, roof complexity, and how much decking needs to be replaced once the old roof comes off. Here’s what you should expect based on what we price across the area:
- CWS asphalt shingle full replacement: $14,000 – $22,000 for a standard Palm Beach single-story home. Architectural shingles, new underlayment, full re-flash, new edge metal and vents.
- CWS tile roof re-underlayment with tile reset: $11,000 – $18,000 depending on tile condition and roof pitch. This is the “tile looks fine but leaks” fix.
- CWS metal roof full replacement: $24,000 – $40,000 for standing seam or exposed-fastener panel replacement on an average Palm Beach home.
- Decking replacement (if rot found): $3 to $5 per square foot of affected area. We show you the rot before we touch it.
- What moves the price: second-story work, steep pitches, tile removal and reset labor, existing code upgrades required by current Palm Beach wind-load standards, and whether we need a crane for tile or metal phase-offs on tight lots. We quote all of that upfront, in writing, before you commit.
Call (561) 831-7863 for an exact quote. Estimates are free, and we’ll walk you through every line item so there are no surprises on the invoice.
Why Palm Beach Homeowners Call Winslow Windows & Doors for CWS Work
We’re the local, owner-operated alternative to the faceless installers. Ed Winslow’s name is on the door, and the 36500-Day Done Right Promise is our standing answer to any question about accountability. If it’s not right, we make it right. We’ve been serving these communities since 2011, we answer the phone with a live person 24/7, and every tech who shows up at your Palm Beach home is background-checked and in uniform. When we’re on a CWS roof, we know what we’re looking at because we work across the full exterior protection lineup: PGT, CGI, CWS, ES Windows, ECO Window Systems, Therma-Tru, and ViewLux. That means we see how the roof, the windows, and the doors work together as one system, not as isolated parts. And we offer $40 off any repair over $200, free second opinions on written estimates, no trip charge inside the home county, and a permanent 10% discount for seniors and veterans. No expiration dates. No fine print. That’s just how we run it.
FAQs
Yes, in most cases. As an independent CWS service provider, we follow manufacturer installation specs and use OEM CWS parts where warranty coverage depends on it. Where an aftermarket part matches or exceeds CWS spec and saves you money, we’ll show you both options in writing before any work starts. The decision is yours, and we never hide a parts choice in the fine print.
Most full CWS replacements in Palm Beach finish in 3 to 5 working days once permits clear and materials are on site. Tile re-underlayment jobs can run a day or two longer because of tile removal and reset labor. We give you a start and end date before the job begins, and we hit them. Call (561) 831-7863 and we’ll give you a real timeline based on your roof, not a generic guess.
If the decking is sound and the failure is localized (flashing, a handful of broken tiles, one slope of granule loss), repair makes sense. If you’re seeing multiple leaks, widespread underlayment failure, or a roof that’s past 20 years old in Palm Beach humidity and salt air, replacement is usually the smarter long-term money. We’ll tell you which one we’d do on our own house and show you the evidence, not just tell you.
Yes, always. We pull all required Palm Beach permits, schedule inspections, and make sure the job passes before we call it done. Unpermitted roof work creates liability and resale problems down the road. We won’t cut that corner.
Only if we find rot or structural damage that was hidden under the existing roof and couldn’t be seen during inspection. If we find it, we show you photos, we show you the decking, and we get your written sign-off before we do anything beyond the original quote. No silent change orders. No surprises at the end. That’s a promise with Ed Winslow’s name behind it.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.