Awning Windows

Awning Windows in Palm Beach, FL | Winslow Windows & Doors

Awning windows hinge at the top and crank outward from the bottom, which means you can leave them cracked open during a passing Florida downpour without water finding its way inside. That alone explains why they’ve become a staple in Palm Beach homes, from mid-century ranch renovations in West Palm to new coastal builds further south. Winslow Windows & Doors installs impact-rated awning windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, every unit laminated impact glass in a weathertight frame, set level and square by installers who understand Palm Beach County wind zones. For a free estimate on awning windows anywhere in Palm Beach, call (561) 831-7863 and we’ll walk you through options and pricing.

Call (561) 831-7863

Product Overview - Awning Windows

Awning windows solve a problem every Palm Beach homeowner knows too well. You want fresh air moving through the house, but the afternoon thunderstorms roll in fast, and standard windows force a choice: closed up tight or water on the sill. A top-hinged, crank-out design changes that completely. Open the window a few inches and the glass panel becomes a small roof, shedding rain while airflow continues. Close it and the multi-point locking mechanism cinches the sash into a weathertight frame.

That frame comes in aluminum or vinyl, both of which hold up in Palm Beach’s salt-heavy coastal air. Aluminum delivers a slimmer sightline and a more architectural profile, which suits the clean lines of Florida modern homes. Vinyl offers natural thermal performance with very little maintenance, which appeals to owners of older concrete-block homes looking to replace corroded originals. Either way, the laminated impact glass at the center of the assembly is what makes this an impact window, not just a ventilation window. We configure the right combination of frame, glass, and finish for the exposure your specific elevation faces, then install it as a complete system, not a collection of parts.

Technical Specifications

The awning window line we install in Palm Beach can be tailored to nearly any opening. Here’s what’s on the spec sheet:

• Frame Materials: Aluminum or vinyl, chosen by structural need and design preference
• Glass Options: Laminated impact glass (PVB interlayer), Low-E insulated glass, tinted glass, clear glass
• Finish Options: White, almond, bronze, black, or tan; custom color matches available on several lines we carry
• Screen Options: Fixed screen or retractable screen
• Operation: Crank-out hardware with multi-point locking
• Design Pressure: Matched to your specific Palm Beach wind zone, up to +/-100, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration

Because this is an impact-rated product, every window gets tested as a full assembly, frame, glass, and hardware together. You don’t pick a frame and hope the glass holds up. You get complete system performance ratings we can reference on your quote.

Hurricane & Compliance Performance

Laminated Impact Glass

Two panes of glass bonded with a PVB (polyvinyl butyral) interlayer. If impact occurs, the interlayer holds the glass in the frame rather than letting it shatter into the room. The window is damaged but intact, which is exactly what the Florida Building Code intends.

Miami-Dade NOA / Florida Product Approval

Each awning window configuration carries a Miami-Dade Notice of Acceptance or Florida Product Approval number. These numbers are issued per configuration, so we verify the exact product number against your specific size and glass package when we build your quote.

FBC / HVHZ Compliance

These awning windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements, the stricter standard that governs Palm Beach and the rest of Miami-Dade and Broward. We assume HVHZ compliance on every Palm Beach project unless your property sits in a different wind zone.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under a protocol family that includes TAS 201 large-missile impact, TAS 202 cyclic wind-pressure loading, and TAS 203 forced-entry resistance. These tests simulate what a window actually endures during a storm, repeated pressure cycles, flying debris, and attempted entry after impact.

Design Pressure for Your Wind Zone

Design pressure is the PSF rating that tells you how much wind load the window can take. We match design pressure to wind zone, up to +/-100, never higher. Adding “bigger” numbers doesn’t help; matching the real calculation for your Palm Beach elevation does.

Energy Performance

Low-E and insulated glass options are available on this line. For east- and west-facing walls that catch full morning or afternoon sun, an insulated Low-E package cuts heat transfer and keeps the room noticeably cooler without changing the window’s impact rating.

Color & Glass Options

The finish palette covers what most Palm Beach architecture actually uses. White and almond fit the classic Florida ranch and coastal cottage look. Bronze and black give a sharper, more contemporary frame line that reads well on Mediterranean and West Indies-style homes. Tan quietly disappears against stucco in earth tones. On higher-end custom builds, we’ve done custom color matches through several manufacturers we carry, so the windows don’t fight the house.

Glass selection depends on the wall the window faces. Clear laminated impact glass is the straightforward choice for shaded north walls. Tinted glass works well on south- and west-facing walls where glare matters. Low-E insulated glass is the pick for bedrooms and kitchens that catch the Palm Beach afternoon sun, cutting heat gain while still meeting every impact requirement. We’ll go over the tradeoffs on your quote so you’re paying for what you need, not what sounds impressive.

Installation by Winslow Windows & Doors in Palm Beach

An awning window with a Miami-Dade NOA only performs as rated if it’s installed correctly. That’s the part most people overlook. A window that’s out of level by a quarter inch won’t seat properly in its frame, which changes how the hardware engages and how water drains. That’s exactly why we build a repeatable process and follow it on every project.

We start with a pre-install inspection of the opening, checking the rough framing, existing flashing, and any rot or corrosion at the sill. Then the window goes in level, plumb, and square, shimmed and fastened per manufacturer spec. We follow AAMA 2400/2410 installation practice, and we seal the perimeter with AAMA 812 low-expansion foam, which creates a continuous air and water barrier without putting pressure on the frame. After installation, we run a water test on the opening, then clean up the site like we were never there, except for the new window.

Palm Beach adds a few layers to this. Coastal exposure means salt and moisture get into every installation detail, so flashing and sealant choices matter more here than inland. Wind zone calculations differ block by block in some areas. And your municipal permitting office may require the NOA or Florida Product Approval number on the permit submittal. We handle that documentation as part of the project. Improper installation compromises the entire NOA-rated system, which is a long way of saying the installation is not the place to save money.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Palm Beach

If you’re pricing awning windows for a Palm Beach home, let’s get you real numbers instead of brochure ranges. We’ll come out, measure each opening, check the condition of your existing frames, and put together a line-item quote with the glass, finish, and compliance package that fits your home. Call (561) 831-7863 to schedule a free on-site measurement or to ask any question you’ve been holding onto.

Written by the team at Winslow Windows & Doors, serving Palm Beach and surrounding communities.