Mr-Glass Window Installation Nationwide | Winslow Windows & Doors

Mr-Glass Window Installation: The Palm Beach Owner’s Guide

Mr-Glass window installation in Palm Beach typically runs $85-$220 per window for a standard sash, balance, or latch replacement, and $340-$1,100 per opening when the frame or full unit needs to come out and go back in properly. We stock most common Mr-Glass hardware on our trucks, so a single failed part usually gets fixed the same visit. Most owners find us after a window that won’t stay up, a crank that spins without moving the sash, or a frame that’s suddenly letting Palm Beach humidity pour in around the edges.

Call (561) 831-7863

If your Mr-Glass window is sticking, sagging, or leaking air, the fix usually comes down to one worn part, not a whole new window. We’ve been installing and servicing Mr-Glass products in Palm Beach since 2011, and we can match your hardware to the exact series and year without guesswork. Winslow Windows & Doors is an independent, locally owned company in Palm Beach; we’re not affiliated with Mr-Glass, but we’re an authorized installer for their products, which means we get the right parts instead of improvising with whatever’s on the shelf.

Key takeaways:

• Most Mr-Glass window installation parts are stockable on the truck and replaceable same visit.
• Palm Beach salt air and humidity wear out hardware faster here than inland; we factor that into what we recommend.
• Upfront pricing, no trip charge inside our home county, and Ed Winslow’s name on every job.

Which Mr-Glass Models This Applies To

Mr-Glass has built several window lines over the years, and the hardware is not always interchangeable, which is the single biggest compatibility gotcha we see. A balance from a 2014 single-hung won’t necessarily fit a 2019 casement, even if both are Mr-Glass. The quickest way to identify your part is to look for the etched label on the sash edge or the top of the frame: it lists the series code, manufacturing date, and sometimes the glass spec. If the label is worn off, we measure the sash weight, channel depth, and balance length, and match from there.

The OEM-versus-aftermarket decision matters with Mr-Glass specifically because some of their older balances and shoe assemblies have odd channel widths that generic aftermarket parts don’t seat into cleanly. We prefer OEM when the part is available at a sane lead time, because Mr-Glass parts install like they’re supposed to. When OEM is discontinued or backordered, we use aftermarket equivalents that we’ve tested in Palm Beach conditions; salt air and humidity will expose a cheap knockoff within a year, and a window that slams shut is not something we hand back to a customer.

We also install and service windows from PGT, CGI, and CWS, so if your home has mixed brands, we can fix the whole elevation in one trip.

Signs Your Mr-Glass Window Installation Is Failing

Every symptom below has a specific mechanical cause. Here’s what Palm Beach homeowners call us about, and what’s actually going on inside the frame:

• The sash drops the moment you let go. That’s a failed balance system, either the spiral rod or the block-and-tackle assembly. In Palm Beach’s humid air, the internal springs corrode faster than in drier climates, and one side usually fails before the other. Fixing it means replacing both balances as a pair, even if only one looks dead.
• The window cranks but the sash doesn’t move. The crank operator’s gear teeth have stripped, often after years of forcing the window against a warped track from heat and moisture. It’s a $90-$160 part and a common Mr-Glass casement repair.
• You can feel air moving around the frame edges even when the window is shut. The weatherstripping has compressed or the frame has shifted. A new seal is a cheap fix; an out-of-square frame from a settling slab is a different job entirely, and we’ll tell you which one you have before quoting anything.
• Condensation appears between the glass panes. The insulated glass unit’s seal has failed. Mr-Glass units are solid, but Palm Beach’s heat cycles and salt air eventually find their way through any seal. This is an IGU replacement, not a hardware fix.
• The lock won’t engage, or engages with force. The keeper and latch are misaligned, usually because the sash has settled a fraction of an inch. On an impact-rated Mr-Glass window, a lock that doesn’t seat properly is also a storm protection issue, and it’s worth fixing before the next hurricane watch.

Replacement Cost & What’s Included

In Palm Beach, expect $85-$220 installed for a single Mr-Glass balance, latch, crank operator, or weatherstripping replacement, with the higher end covering casement hardware and sash tear-outs. A full insulated glass unit runs $340-$900 depending on size and whether it’s impact-rated. A complete Mr-Glass window removal and reinstallation, including flashing and resealing against Palm Beach rain, runs $550-$1,100 per opening. Every quote is line-item: part, labor, and no change orders.

Our pricing is upfront, and it stays the number you agreed to. Every Mr-Glass window installation carries our 36500-Day Done Right Promise: if it’s not done right, we come back and make it right, whether that’s a week later or a decade later. We also knock $40 off any repair over $200, offer a free second opinion on any written estimate, and give a permanent 10% discount to seniors and veterans. Ed’s name is on the door, and on every invoice.

DIY or Call Us?

You can safely check a few things before calling: look for a visible label or stamp on the sash, note whether one side or both sides of the window are failing, and see if the track is visibly bent or clogged with debris. That’s all useful information to have ready when you call, and it helps us bring the right part. What we don’t recommend is pulling a Mr-Glass sash out of the frame on your own. Balance systems are under tension, and if one side releases before the other, the sash can come down hard on your hands or the frame. We’ve seen DIY attempts turn a $150 balance job into a cracked frame and a much bigger invoice.

If your Mr-Glass window needs hardware or a full reinstallation, call us at (561) 831-7863. We’ll bring the part, the tools, and an honest assessment of what’s actually wrong. If it turns out to be a $12 seal and not a $400 sash, we’ll tell you that and fix the seal.

FAQs