Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Windows & Doors in Palm Beach Gardens, FL | Winslow Windows & Doors
Winslow Windows & Doors provides independent Therma-Tru service and our Window Installation in Palm Beach Gardens across Palm Beach Gardens, from PGA National to BallenIsles and Mirasol. We’re not a manufacturer affiliate, but our techs work on Therma-Tru doors daily, and we know exactly how the brand’s fiberglass slabs and multi-point locks behave in salt-heavy coastal air. The thing that sets our Palm Beach Gardens Therma-Tru work apart is we plan for HOA architectural review from day one, not after the permit gets flagged. Call (561) 831-7863 for a free estimate and we’ll walk you through the whole process.
Why Palm Beach Gardens Residents Choose Us for Therma-Tru Service
Ed Winslow started this company in 2011, and he learned window and door work the old way: on real job sites, including estate corridors off El Brillo Way where a sloppy frame or the wrong glass tint gets noticed by the architectural board in about five minutes. Our techs understand Therma-Tru’s product engineering because they’ve repaired and replaced Classic-Craft, Smooth-Star, and Pulse Series doors in Palm Beach Gardens homes for over 15 years. We use OEM Therma-Tru components where it matters: door slabs, frames, multi-point lock gearboxes. For seals, sweeps, and finish hardware, we often specify marine-grade aftermarket parts that hold up better against Palm Beach Gardens salt air than factory originals. That’s not a knock on Therma-Tru. It’s just reality when you live five miles from the Atlantic behind a set of aluminum gates. We’re also the crew that answers the phone live at 2 a.m., not a call center reading a script. Ed’s name is on the truck and on every job we do.
Common Therma-Tru Windows & Doors Problems We Solve in Palm Beach Gardens
- Warping and delamination of fiberglass door skins. West-facing entries in Palm Beach Gardens take brutal afternoon UV, and over time the outer skin on Therma-Tru fiberglass doors can delaminate at the corners. It starts as a small bubble near the panel edge, then spreads. Once the skin separates, moisture gets in and the door’s structural integrity drops fast.
- Seized multi-point lock mechanisms. We see this constantly in PGA National and Mirasol. Salt-laden air works its way into the gearbox, the internal grease breaks down, and the shoot bolts get sticky, then seize completely. Often the lock needs annual lubrication; sometimes the gearbox needs full replacement with an OEM Therma-Tru part.
- Degraded weatherstripping and door sweeps. The heat and salt combination in Palm Beach Gardens cooks rubber and vinyl seals. You’ll feel the draft first, then see light under the door, then notice the electric bill creeping up. We replace these with marine-grade materials that last significantly longer than standard factory sweeps.
- Sagging slabs and latch misalignment on heavier Therma-Tru doors. Thermal movement in Florida’s heat-and-cool cycles shifts adjustable hinges and alignment plates. A Therma-Tru Classic-Craft slab is heavy, and once it drops an eighth of an inch, the latch no longer lines up with the strike plate and the door starts binding.
- Corroded frame bases at the threshold. In Palm Beach Gardens homes built in the ’80s and early ’90s, the original door frames were often set without proper sill flashing. Sea air plus irrigation overspray creates corrosion at the frame base. If the frame is corroded beyond shimming, we recommend full replacement; if not, we can rebuild the sill and re-seat the door.
Therma-Tru Service in Palm Beach Gardens: What Local Conditions Mean for Your Equipment
Here’s what most people don’t realize until they’re deep into a Therma-Tru door replacement in Palm Beach Gardens: the contractor’s local knowledge matters more than the door itself because of the HOA board sitting between you and your permit. In PGA National, BallenIsles, and most of the gated communities around PGA Boulevard, the architectural review committee requires a formal product submittal before you can pull a permit. That means Miami-Dade or FBC Notice of Acceptance documentation, frame color samples, and glass specifications, if applicable. We’ve seen out-of-area crews skip this step entirely, get to the permit desk, and watch the job die right there. It adds three to six weeks to your timeline, and no amount of product quality fixes a permit refusal. Ed’s crews have run this process so many times in Palm Beach Gardens that we build it into the schedule upfront. We know which communities want a specific Therma-Tru finish, which ones restrict glass tint, and which ones will reject a door because the profile style doesn’t match the existing elevation. That’s the real difference between a vendor who sells you a door and a contractor who gets it approved and installed.
Therma-Tru Models & Products We Service in Palm Beach Gardens
We service and install the full residential Therma-Tru lineup that makes sense for South Florida: Classic-Craft Fiberglass Entry Doors, Smooth-Star Fiberglass Entry Doors, Pulse Series Entry Doors, and the Fiber-Classic Mahogany Collection. We carry OEM Therma-Tru slabs, frames, and multi-point lock assemblies in local inventory for the most common sizes, which helps keep turnaround tight when a door fails unexpectedly. For seals, sweeps, and hardware finishes, we keep marine-grade alternatives on hand because standard factory weatherstripping simply doesn’t last as long in Palm Beach Gardens salt air. We also handle full-frame replacement jobs, including the sill rebuild and flashing work that matters most when you’re five to ten miles from the ocean.
Therma-Tru Service Pricing in Palm Beach Gardens
Most Therma-Tru service calls in Palm Beach Gardens fall into a few clear buckets. A multi-point lock gearbox replacement on a Classic-Craft or Smooth-Star door typically runs $280 to $460, including the OEM part and labor. Weatherstripping and door sweep replacement runs $140 to $260 depending on the door size and seal type. Hinge adjustment and slab re-alignment is usually $120 to $200. A full Therma-Tru fiberglass entry door replacement, including frame, slab, hardware, and installation, starts around $2,600 and goes up depending on the model line, glass options, and impact rating. What drives cost in Palm Beach Gardens specifically is HOA paperwork and the salt-air environment: marine-grade seals add a bit upfront but save you a second service call. Every estimate is free, written, and line-itemed so you see exactly where each dollar goes. Call (561) 831-7863 for an exact quote on your door.
Serving Palm Beach Gardens, FL - Our Local Coverage Area
We’re based in the Palm Beach Gardens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Therma-Tru Windows & Doors in Palm Beach Gardens
Yes. We use OEM Therma-Tru replacement components for lock bodies and gearboxes specifically to preserve warranty intent and fit. Our techs will inspect the full mechanism, explain what’s worn versus what’s just gummed up with salt air, and only replace what actually needs replacing. Call (561) 831-7863 and we’ll walk you through what we’re seeing.
It will. Salt air accelerates corrosion on metal hardware and degrades rubber and vinyl seals faster than Therma-Tru’s own maintenance guidelines anticipate for inland climates. We recommend annual lubrication of the multi-point lock, bi-annual inspection of weatherstripping and sweeps, and checking hinge plates for drift every spring. If you want us to do it, we offer maintenance visits for Palm Beach Gardens homes; call (561) 831-7863 to schedule.
If your existing Therma-Tru frame is structurally sound and not corroded beyond shimming, we can replace the slab only. We do it regularly in Palm Beach Gardens, especially on doors where the skin has cracked or delaminated but the frame is still solid. If the frame base is corroded or the rough opening has shifted, a full-frame replacement is the better long-term move. We’ll tell you straight which one your situation calls for. Call (561) 831-7863 for a free assessment.
Yes. We install Impact Windows in Palm Beach Gardens and impact-rated Therma-Tru entry doors with Miami-Dade Notice of Acceptance documentation, which is exactly what PGA National’s architectural review board requires before you can pull a permit. We handle the submittal process, including frame color samples and glass specs, and we build the three-to-six-week review timeline into your project schedule from the start. Call (561) 831-7863 to get the paperwork moving.
It depends on how deep the damage goes. Surface-level fading and hairline finish cracks can often be restored with proper prep and a high-quality exterior coating. But if the fiberglass skin itself is delaminating or the cracks go through the outer layer, that’s a replacement issue, not a refinish one. We’ll give you an honest read on site. Call (561) 831-7863 and we’ll take a look, estimates are free.
Service Areas Near Palm Beach Gardens
Our Therma-Tru service covers Palm Beach Gardens and surrounding communities, including Therma-Tru service in Palm Beach, Therma-Tru service in West Palm Beach, North Palm Beach, Lake Worth Beach, and Riviera Beach. If you’re in a gated community off PGA Boulevard or further south near Okeechobee, we’re already working in your area. For the full picture on what we do across the region, see our Palm Beach Gardens service area page, or visit our main Therma-Tru sales & service hub for brand-specific details.
Book Your Therma-Tru Service in Palm Beach Gardens Today
If your Therma-Tru door is binding, leaking air, or the multi-point lock is fighting you, don’t wait until the HOA season starts or the next storm blows through. Call (561) 831-7863 and a real person will answer, day or night. We’ll schedule a free estimate and walk you through what needs fixing, what needs replacing, and what the whole thing costs before any work begins. Ed’s name is on the truck. That’s reason enough to do it right.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach Gardens since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.