Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterVinyl Replacement Windows in Palm Beach, FL
Vinyl replacement windows are one of the most practical upgrades a Palm Beach homeowner can make – they eliminate drafts, cut cooling costs, and hold up against salt air and hurricane-season humidity without the maintenance that wood or aluminum frames demand. At Winslow Windows & Doors, we’ve been fitting vinyl windows into Palm Beach homes since 2011, and Ed Winslow personally stands behind every installation with our 36500-Day Done Right Promise: if it’s not right, we come back and make it right, no argument, no ticket number to chase.
If you’re comparing quotes or just trying to figure out what you actually need, call us at (561) 831-7863 – a live person picks up every time, around the clock. You can also read more about the full scope of what we do on our Window Replacement in Palm Beach page.
Vinyl replacement windows in Palm Beach typically run $350 to $900 per window installed, depending on size, impact rating, and frame style. Most jobs are completed in a single day. Impact-rated PGT vinyl units – the most requested product we install in Palm Beach – sit in the middle to upper part of that range and carry both a manufacturer warranty and our own 36500-Day promise.
When You Need Vinyl Replacement Windows
Not every window problem calls for a full tear-out, but when you’re seeing more than one of the following, replacement almost always beats repeated repair:
- Fogged or yellowed glass between panes. Seal failure in a double-pane or impact unit is irreversible – once moisture gets in, the insulating gas is gone and your energy bills reflect it. In Palm Beach’s climate, we see this accelerate on west-facing windows that bake from early afternoon onward.
- Frames that are warped, cracked, or painted shut. Older aluminum frames in Palm Beach homes corrode quickly in the salt-laden air off the Atlantic. Vinyl doesn’t corrode, doesn’t need painting, and won’t swell shut after a week of 90-percent humidity.
- Drafts you can feel during air conditioning season. When your hand near the frame feels noticeably warmer than the room, you’re essentially paying FPL to cool the outside. Upgraded vinyl units with low-E glass can cut solar heat gain by 40 percent or more.
- Single-pane or non-impact glass. Palm Beach County requires impact-rated or shuttered protection for any permitted window installation. If your home still has single-pane windows – common in pre-1990s construction in areas like El Cid and Prospect Park – you’re overdue for code-compliant replacement.
- Windows that won’t lock or open smoothly. A window that sticks or won’t latch isn’t just an annoyance – it’s a vulnerability during storm season and a liability if you need egress in an emergency.
- Rising energy bills without another obvious cause. We’ve walked homes in the South End of Palm Beach where cooling costs dropped noticeably after replacing the original jalousie and single-pane windows with vinyl impact units. The payback period on good vinyl windows in Florida’s climate is shorter than most homeowners expect.
Our Vinyl Replacement Windows Process
We keep this straightforward because homeowners have enough going on without a contractor who speaks in jargon. Here’s exactly what happens when you work with Winslow:
- Free in-home measurement and estimate. Ed or one of our uniformed, background-checked technicians visits your home, measures every opening precisely, and reviews your options in plain language. There’s no trip charge inside Palm Beach County, and you’ll get a written price before anyone picks up a tool. Upfront pricing – no surprises on the invoice.
- Product selection and permit filing. We’ll walk you through the vinyl window lines we carry – including impact-rated PGT units, which are manufactured specifically for Florida’s coastal conditions – and match frame color, glass package, and performance specs to your home and budget. We file for Palm Beach building permits on your behalf. In our experience, permit timelines in Palm Beach proper average two to three weeks; we schedule your install date around approval.
- Pre-installation prep. On installation day, our crew arrives in uniform at the agreed time. We cover interior surfaces, move furniture away from work areas, and protect flooring. You won’t be left guessing who’s walking through your door – we send technician information in advance.
- Precision removal and installation. Old frames come out carefully to avoid drywall or stucco damage. New vinyl frames are set, leveled, and shimmed to manufacturer spec, then flashed and sealed against Palm Beach’s driving rain. Every unit gets tested for smooth operation and proper lock engagement before we move to the next opening.
- Inspection and sign-off. We walk every window with you before we pack up. If the county inspector finds anything – which is rare when permits and installation are done correctly – we handle it at no additional charge.
- Post-install follow-up. You’ll have Ed’s contact information. If anything feels off in the weeks after installation – an adjustment needed, a question about the warranty paperwork – call (561) 831-7863 and someone will answer.
Vinyl Replacement Windows Pricing in Palm Beach
Vinyl replacement window costs in Palm Beach vary more than most contractors admit upfront. Here’s an honest breakdown of what affects your total:
| Window Type / Scenario | Typical Installed Cost (Per Window) |
|---|---|
| Standard double-hung vinyl, non-impact (interior use only with shutters) | $350 – $500 |
| Impact-rated vinyl single-hung or double-hung (PGT or CGI) | $500 – $750 |
| Impact-rated vinyl sliding or picture window, standard size | $550 – $800 |
| Oversized or custom-shaped vinyl impact window | $750 – $900+ |
| Full-home replacement (10+ windows, same-day crew) | Volume pricing – ask for a project quote |
A few things that push costs toward the higher end in Palm Beach specifically:
- Older stucco homes – common in Palm Beach’s historic districts – sometimes need stucco repair or re-finishing around the opening after old aluminum frames are removed. We’ll flag this on the estimate if it applies.
- Second-story or oceanfront installations – additional equipment or wind-load specifications can add to labor.
- Glass package upgrades – low-E coatings, laminated glass, and argon-filled units all affect the unit price, and in Palm Beach’s direct coastal exposure, the upgrade often pays for itself in cooling savings within a few years.
- Permit and inspection fees – Palm Beach County permit costs are separate from installation labor and vary by project scope; we’ll include the estimate in your written quote.
Our standing offers apply to every job: $40 off any repair over $200, a free second opinion on any written estimate you’ve already received, and a permanent 10% discount for seniors and veterans. These aren’t promotions with an expiration date – they’re part of how we do business.
Call (561) 831-7863 for a free in-home estimate. We’ll give you a written number before any work begins.
Why Vinyl Beats Aluminum in Palm Beach’s Climate
This is worth saying directly, because a lot of Palm Beach homes – especially anything built before 1995 in neighborhoods like Flamingo Park and Grandview Heights – still have original aluminum frames that may need a Window Replacement. Aluminum was the contractor default for decades because it was cheap and easy to source. But aluminum conducts heat aggressively, which is the last thing you want when afternoon sun is pushing indoor temps up. It also oxidizes in salt air, which creates the chalky, pitted finish you’ve probably noticed on older windows near the water.
Vinyl doesn’t conduct heat the way aluminum does. A quality vinyl frame with a thermal break and low-E glass significantly reduces the amount of radiant heat transferred into your living space. It won’t corrode, doesn’t need repainting every few years, and – when impact-rated – meets Palm Beach County’s wind-load requirements for coastal construction. The brands we install, including PGT and CGI, engineer their vinyl impact products specifically for Florida’s exposure categories. These aren’t generic vinyl windows from a big-box shelf.
Wood windows have their place in certain historic applications, but in Palm Beach’s humidity and salt environment, wood demands consistent maintenance that most homeowners reasonably don’t want to take on. Vinyl is the practical choice for almost every non-historic residential application in this market.
Impact-Rated Vinyl Windows and Palm Beach County Code
Palm Beach County’s building code requires that any new window installation either be impact-rated or paired with an approved storm shutter system. For most homeowners replacing windows in Palm Beach, impact-rated vinyl is the cleaner solution – you get the protection without the step of deploying shutters before every storm, and your insurance carrier may recognize the upgrade with a premium adjustment.
The impact vinyl units we install carry Miami-Dade Notice of Acceptance (NOA) ratings, which are required for coastal Florida installations and are among the most stringent product certifications in the country. When we pull your permit and schedule the county inspection, the inspector verifies the product documentation alongside the installation. We handle that paperwork – you don’t have to track it down yourself.
If you’re replacing windows in a Palm Beach historic district property, there may be additional review from the Landmarks Preservation Commission depending on whether the change is visible from a public right-of-way. We’ve navigated this process before and can advise you on what to expect. It adds steps, but it’s manageable.
Winslow Windows and Doors: The Local Alternative to National Chains
When a national window company sends a crew to Palm Beach, you’re working with a franchise operation where the person who sold you the job isn’t the person installing it, and the person installing it has no stake in whether you’re happy five years from now. The warranty paperwork goes to a call center.
Winslow is different in a specific, verifiable way: Ed Winslow’s name is on the business, his license number is published, and his phone rings at (561) 831-7863 – answered by a live person every hour of every day. The 36500-Day Done Right Promise isn’t a marketing slogan. It means that for as long as this business exists, if something we installed isn’t right, we fix it. That’s Ed’s word, not a policy written by a legal team to have as many carve-outs as possible.
We’ve been doing this in Palm Beach since 2011. That’s over fifteen years of installs in this specific market, in this specific climate, with the permit history and the relationships with county inspectors that come from doing the work consistently and correctly. We’re not passing through – we’re the one down the road.
FAQs – Vinyl Replacement Windows in Palm Beach
How long does it take to replace vinyl windows in a Palm Beach home?
Most single-room or partial-home vinyl window replacements in Palm Beach are completed in one day. A full-home replacement of ten to fifteen windows typically runs one to two days depending on accessibility and whether any stucco repair is needed around old openings. The permit approval process – which we handle for you – usually takes two to three weeks in Palm Beach, so that’s the main factor in scheduling your start date, not the installation itself. Call (561) 831-7863 and we can give you a realistic timeline for your specific project.
Are vinyl impact windows worth the extra cost over non-impact vinyl in Palm Beach?
Yes, for almost every Palm Beach homeowner. Non-impact vinyl windows are less expensive upfront but require you to install and remove storm shutters before every named storm – and Palm Beach County code requires one or the other. Impact-rated vinyl eliminates that labor, may qualify your home for a wind mitigation insurance credit, and provides year-round protection without any action on your part. The price gap between non-impact and impact vinyl has narrowed considerably in recent years, and when you factor in shutter hardware and storage, the total cost difference is often smaller than it first appears.
Can vinyl replacement windows be installed in historic Palm Beach homes?
It depends on the property and the specific opening. Palm Beach’s Landmarks Preservation Commission reviews exterior changes on designated historic properties, and street-facing window replacements may require approval. That said, vinyl windows with profiles that approximate traditional wood or steel sash have been approved in Palm Beach’s historic districts in cases where the visual change is minimal. We’ve worked through this process and can tell you honestly what’s likely to be approved and what isn’t before you commit to anything. Give us a call at (561) 831-7863 for a no-pressure conversation.
How much can I save on energy costs after replacing old windows with vinyl impact units in Palm Beach?
Actual savings vary based on your home’s size, orientation, existing insulation, and how inefficient your current windows are. In Palm Beach homes we’ve replaced – particularly those with original jalousie or single-pane aluminum windows – homeowners routinely report noticeable reductions in their FPL cooling bills, especially during the May through October peak season. A vinyl impact unit with low-E glass can block a significant portion of solar infrared heat compared to clear single-pane glass. We don’t promise a specific dollar figure because every home is different, but the efficiency case for vinyl impact windows in South Florida is well-documented by Florida’s own energy code requirements. For a realistic estimate of what your specific home might see, our in-home assessment includes a review of your current window condition.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.